Submission Details
wytiwx的CPU Frequency成绩 - 极限联盟
8505.55 MHz 和 Intel Celeron D 352 在 8505.6MHz
排名位置
n/a
全球排名
n/a
Celeron D 352 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not wytiwx's best submission
0.0 积分
-
硬件分数(UHP)
Not wytiwx's best Celeron D 352 submission
0.0 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not TeamChina's best submission
0.0 积分
-
硬件战队能量分(HTPP) Not TeamChina's best Celeron D 352 submission
0.0 积分
硬件细节
CPU细节
- 型号: Intel Celeron D 352 'Cedar Mill-512'
- 散热: Liquid Nitrogen
- 批号
- Cores: 8,505.55MHz(+165.80%)
-
内存细节
- 类别 DDR3 SDRAM
显卡细节
- 速度:: MHz / MHz ()
主板细节
- 厂商: ASUS
- 型号: P5E64 WS Evolution
- 散热: Air (Custom)
- 芯片组: X48
-
近期的评论
wytiwx 评价他自己的分数:
For Chinese year of the Snake. Vcore 2.095V. Better Vcore tuning. To be continued... http://www.xtremesystems.org/forums/showthread.php?284942
varand 说:
WOW, congrats bro =D
ƒ0rteOC 说:
That is amazing!
pxhx 说:
hahaha your celeron is unstoppable! Congrats!
Gigioracing 说:
but the x48 support 533 fsb cpu ??
metallo97 说:
Nope, he boots at 800 of fsb i think.
Morteza.p 说:
well done!
subaruwrc 说:
and keeps scaling and keeps scaling ..
wish my 3770k could do that nice WR
pixy 说:
impressive celeron... congrats good job!!!
wytiwx 说:
Let me explain this.
Many ASUS P35/X38/X48 mobos can run Celeron D after clearing CMOS and F2 to load the default setting, mobo will run at 533 fsb.
But if you want to change any thing in BIOS, mobo has to run 800 fsb at least.
Gigioracing 说:
yes! I have already tried!
i think need 533> 800 pinmod
说:
Mother of cedarmill... you are the overclockest man on Earth! Please upload some photos What VMch do you use?
wytiwx 说:
I used to do Celly 347 533-->800 fsb pinmod, and do VID mod too. The result was that I managed to run Celly 347 on Biostar TPower I45, which was a P45 chipset.
That was how I did: http://www.miivion.com/data/attachment/forum/201302/10/013727wex2yrf31qqxwfox.png.
I think you already know VID mod, right?
wytiwx 说:
Photos and video will be in the next time, bro... one man, many things.
Vmch was 1.29V~1.31V for no reason, I just like that.
dhenzjhen 说:
man so awsome! please gimme one of those 8ghz celly
Moose83 说:
Really awesome
wytiwx 说:
THX, man
If you have a D0 Cedar Mill chip, which can run Pi 1M at 5.2GHz+ @ Vcore 1.45V on air...
Then congrats man, You get your golden Celly! This chip can do more than 8.0GHz by proper tuning.
amirhosein 说:
i just can say really good . vcore ? can u give a photo of mobo and mods ?
wytiwx 说:
Vcore 2.095V, just like what I said above.
Photos of mobo and mods in url:http://www.xtremesystems.org/forums/showthread.php?284942
metallo97 说:
Hi, do you have a backup of all photos and mods that you have done for this? Because all the links seems dead...
说:
i need them, too
说:
What mods do you need?
说:
i do bsel mod 533 to 800, but p5q3 and blackops don't start!
i think it need vid mod.....but i'm not sure
can you post bsel mod 533 to 800, too? thanks
说:
Wytiwx was using P5E64 WS EVO (or his P5E3 Premium (X48), wchich are ~the same mobos). I was able to start my Cedar Mill 533 FSB processors (on P5E3 Premium) without any problems, without any mods. P5Q3 is a P45 mobo and you should do mods. Maybe do VID mod, it should help you. But if doesn't start on 200 @default, it can be a poor sample.. Why? my example: I have ~6 celeron D 352 with fsb wall on 200 MHz (malay L64x). On ~196-198 it works stable even on AIR, but no way to start it @200 MHz. But when I put Single Stage cooling, this wall changes to 215-220 MHz (5.1-5.2 GHz = poor clocking sample). So, there is an answer: I think, that a good sample should do 4.8 GHz on air. If is it doing 200x24 (or other multi, depends on CPU model), Without voltage change, then you have a very nice one If doesn't start on 200 FSB and ~1.4 V, it's crap.
说:
did you have picture of bsel mod 533 to 800??
this is right?
my sample can do 237 with water at 10°!!!
说:
Photos in this thread gone...
http://www.xtremesystems.org/forums/showthread.php?285327
I was doing this project, but now not need. Here's my thread on polish forum:
http://overclock.pl/forum/threads/9126-Bsel-mod-533-800/page2
I was doing it wrong way. I can explain this.
You (as above photo) did it using good idea. I have done this also:
http://overclock.pl/forum/attachment.php?attachmentid=1962&d=1393874674&thumb=1
But the point is to INSULATE these connections from processor. The connection should be done on LGA775 board pins, not on processor. Do not connect any pins on CPU. Must be any insulation.
Here it is a picture, maybe better than text explain:
说:
so i must to insulate the pins in my picture, and after i apply paint for make 1 circuit? thanks man:D
说:
The best way is to not using connective paint. Use Aluminium foil insteed. Good way is to use two-side sticky tape and small pieces of aluminium on it. Tape is insulation. If you do this properly, it should work. You can do VID mod using connective paint, but not with bsel mod.
说:
The point is to cheat a motherboard, NOT a CPU!
Wrong order. First insulation on CPU pins. Second: metal connecting LGA775 ON MOTHERBOARD.请登录或注册后才能评论