Submission Details
aTomic`s SuperPi - 1M Ergebnis - Extreme League
9sec 781ms mit Intel Pentium E5200 at 5707MHz
Ranglisten Position
n.a.
Globale Rangliste
8th
Pentium E5200 Rang:
8th von 388
Points earned for overclocker league
-
Globale Punkte (UGP)
Not aTomic's best submission
-
Hardware Punkte (UHP)
8th mit Pentium E5200
46.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not 3d-info's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 7th Im Team verwendet Pentium E5200
38.8 Punkte
Hardware Details
CPU Details
- Model: Intel Pentium E5200 'Wolfdale-2M'
- Kühlung: Liquid Nitrogen
- Temperatur (°C): -145 Last-145 Leerlauf22 (Umgebung)
- Cores: 5.707Mhz(+128.28%)
-
Arbeitsspeicher Details
- Manufacturer: Crucial
- Produkt: Ballistix (classic)
- Typ: 2048MB DDR2 SDRAM
- Geschwindigkeit: @ 1.100Mhz
- Timings: CL4.0 4-4-4
VGA Details
- Geschwindigkeit: Mhz / Mhz (Bestand)
Neueste Kommentare
aTomic Kommentierte sein eigenes Ergebnis:
I was prepared for the worst - cb ~ -110*C and reverse scaling with temperature over 5,5GHz which is typical for Wolfdale (2Mb). At least for those which I've benched earlier. But this CPU is a gold one. 1,2v vid 1.22v - 4GHz @ air 1,36v - 4.5GHz @ air 1,56v - 5,25GHz @ ss (wprime) 1,71v - max CPU Need v-pll less than 1,5v to pass over 5,4 ghz. Best vaule is 1,285V. But with oc-clocks boot only with default v-pll. Coldbug on -150*C, booting on 5ghz below -132*C. No other issues ...
aTomic sagt:
No other issues with this set.
For PI i need mb with better ddr3 controler. Here 1600MHz ddr3 is maximum benchable frequency. With ddr2 I only have 4:5 FSB:DRAM multipiler (no 3:4) so performance is not very well.
Morteza.p sagt:
nice job...
test wPrime 32m and 1024M on 5717 MHZ But SuperPi on 5707 MHZ ????
aTomic sagt:
Memory was clocking on 1140mhz 4-4-4-4 and only 2,35v(no memory volt mod) They can do 1200 4-4-4-4 2,3v but not on this board. Wprime was done with stock speed ddr2 and wasn't limited by memory.
The benching was spent on wPrime, Pi score will be updated soon
Bitte einloggen oder register to comment.