Like thisSubmission Details
aTomic`s SuperPi - 1M score
- Extreme League
9sec 781ms with Intel Pentium E5200 
at 5707MHz
Ranking position
n/a
Global rank:
8th
Pentium E5200 rank:
8th out of 388
Points earned for overclocker league
-
Global Points
Not aTomic's best submission
-
Hardware Points
8th using Pentium E5200
46.0 Points
Points earned for team league
-
Global Team Power Points (GTPP) Not 3d-info's best submission
0.0 Points
-
Hardware Team Power Points (HTPP) 7th in team using Pentium E5200
38.8 Points
Media gallery
- Screenshots
-
- P5KC
-
Hardware details
CPU details
- Model: Intel Pentium E5200 'Wolfdale-2M'
-
Cooling:
Liquid Nitrogen
- Temperature (°C): -145 (load)-145 (idle)22 (ambient)
- Cores: 5,707MHz(+128.28%)
-
-
Memory details
- Manufacturer: Crucial
- Product: Ballistix (classic)
- Type: 2048MB DDR2 SDRAM
- Speed: @ 1,100MHz
- Timings: CL4.0 4-4-4
VGA details
- Speed: MHz / MHz (Stock)
Recent Comments
I was prepared for the worst - cb ~ -110*C and reverse scaling with temperature over 5,5GHz which is typical for Wolfdale (2Mb). At least for those which I've benched earlier. But this CPU is a gold one. 1,2v vid 1.22v - 4GHz @ air 1,36v - 4.5GHz @ air 1,56v - 5,25GHz @ ss (wprime) 1,71v - max CPU Need v-pll less than 1,5v to pass over 5,4 ghz. Best vaule is 1,285V. But with oc-clocks boot only with default v-pll. Coldbug on -150*C, booting on 5ghz below -132*C. No other issues ...
No other issues with this set.
For PI i need mb with better ddr3 controler. Here 1600MHz ddr3 is maximum benchable frequency. With ddr2 I only have 4:5 FSB:DRAM multipiler (no 3:4) so performance is not very well.
nice job...
test wPrime 32m and 1024M on 5717 MHZ But SuperPi on 5707 MHZ ????
Memory was clocking on 1140mhz 4-4-4-4 and only 2,35v(no memory volt mod) They can do 1200 4-4-4-4 2,3v but not on this board. Wprime was done with stock speed ddr2 and wasn't limited by memory.
The benching was spent on wPrime, Pi score will be updated soon
Please log in or register to comment.