Submission Details
GRIFF`s Reference Frequency Ergebnis - Extreme League
700.02 MHz mit ASUS Rampage Extreme at 700MHz
Ranglisten Position
n.a.
Globale Rangliste
6th
Rampage Extreme Rang:
6th von 144
Points earned for overclocker league
-
Globale Punkte (UGP)
Not GRIFF's best submission
-
Hardware Punkte (UHP)
6th mit Rampage Extreme
40.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not XtremeOverdrive OC team Italy's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) Not XtremeOverdrive OC team Italy's best Rampage Extreme submission
0.0 Punkte
Mediengallerie
- Verifikations URL, Bilder, Checksumme
- https://valid.x86.fr/5f1sjr
Hardware Details
CPU Details
- Model: Intel Core 2 Duo E8500 'Wolfdale-6M'
- Kühlung: Cascade Phase Change
- Cores: 4.200Mhz(+32.62%)
-
Arbeitsspeicher Details
- Kühlung: Air (Stock)
- Typ: DDR3 SDRAM
VGA Details
- Model: GeForce 6600 LE (GDDR3) (NV43) NVIDIA
- Kühlung: Air (Stock)
- Geschwindigkeit: 425Mhz / 500Mhz (Bestand)
Mainboard Details
- Hersteller: ASUS
- Model: Rampage Extreme
- Kühlung: Single Stage Phase Change
- Chipsatz: X48
-
Neueste Kommentare
GRIFF sagt:
Another one of E8500 better than two previous. Cascade repaired 1 week ago and this is first verification with real load.
ale belo sagt:
Awesome job mate! Congrats
sagt:
Amazing job!
unityofsaints sagt:
Wooooooooow!
Dry_Ice777 sagt:
Amazing! Some BIOS settings for mere mortals? ^^
TerraRaptor sagt:
So you are in >700FSB club?) No jokes, great achievement. What was your air limit?
superpatodonaldo sagt:
great
GeorgeStorm sagt:
Epic work!
GtiJason sagt:
One of 2 REX's to do 700+ ! Killer job Griff
max1024 sagt:
Welcome to 700Mhz Club :) Bravo GRIFF !!!
GRIFF sagt:
Thank you guys. With this cpu on Cascade and NB on air I haven't tried. I will try in the coming days. Impression that I am limited by the CPU. In my opinion the lack of over 700 results due to the cost and rarity of these boards. I have 3 other non-functioning ones. Two of which have SB dead. Let's see how they will go up once they are repaired. I wanted to say thanks to Tapakah, he sold me this card because he didn't go over 600 of fsb. The problem was the lack of compound between the NB and the heat sink.
d0minat0r sagt:
Well done! What temps on CPU PWM without heatsink?
Alpi sagt:
Very nice work ! Grats !
GRIFF sagt:
-15 -25 on bios
leeghoofd sagt:
amazing, still love this platform
GtiJason sagt:
So just like my NIB board I bought from L0ud. Here is the factory paste job
Noxinite sagt:
Crazy! How did I miss this...
GRIFF sagt:
You solve this problem with 1mm copper plate between NB and heat think or use this board with custom NB cooler.
GRIFF sagt:
since these boards have problems with SB (they fail without warning and reasons) I suggest putting a small heat sink on the SB too.
Noxinite sagt:
Interesting. Symptoms of SB death?
GRIFF sagt:
First case: - data lines of the usb ports or a usb port only in short or almost, normal resistance must be on the 1-10Mohm
GRIFF sagt:
Second case: -- heating, even minimal, of the SB from the card off, power supply connected to the 220V. It heats up because the internal circuit of the SB supplied with 5Vsb voltage has low or short resistance. Normally in this case the card does not switch on.
ground sagt:
The second case also helps identify dead chipsets on modern platforms. If they burn your fingers after trying to turn the system on a couple times they are likely dead.
GRIFF sagt:
Third case: - SB overheating from the card on. It normally warms up so much that you can't hold your finger over it.
GRIFF sagt:
Symptoms preliminary to death: difficulty or inability to detect USB and HDD devices at startup.
GRIFF sagt:
Yes. It called HUB.
Bitte einloggen oder register to comment.