Like thisSubmission Details
Le score de 
GRIFF sur Reference Frequency
- Extreme League
700.02 MHz avec ASUS Rampage Extreme à 700MHz
Position dans le classement
n/a
Classement général:
6th
Rampage Extreme classement:
6th sur un total de 144
Points earned for overclocker league
-
Points Global (UGP)
Not GRIFF's best submission
-
Points Hardware (UHP)
6th utilisant Rampage Extreme
40.0 Points
Points earned for team league
-
Points Global Team Power (GTPP) Not XtremeOverdrive OC team Italy's best submission
0.0 Points
-
Points Hardware Team Power (HTPP) Not XtremeOverdrive OC team Italy's best Rampage Extreme submission
0.0 Points
Gallerie photos
- Captures d'écran
-
- Rampage Extreme
-
- URL, image ou code de vérification
- https://valid.x86.fr/5f1sjr
Détails matériel
Détails Processeur
- Modèle: Intel Core 2 Duo E8500 'Wolfdale-6M'
- Refroidissement: Cascade Phase Change
- Cores: 4 200MHz(+32.62%)
-
-
Détails mémoire
- Refroidissement: Air (Stock)
- Type: DDR3 SDRAM
Détails carte graphique
- Modèle: GeForce 6600 LE (GDDR3) (NV43) NVIDIA
- Refroidissement: Air (Stock)
- Fréquence: 425MHz / 500MHz (Stock)
-
Détails carte mère
- Fabricant: ASUS
- Modèle: Rampage Extreme
- Refroidissement: Single Stage Phase Change
- Chipset: X48
-
Commentaires récents
Another one of E8500 better than two previous. Cascade repaired 1 week ago and this is first verification with real load.
Awesome job mate! Congrats
dit :
Amazing job!
Wooooooooow!
Amazing! Some BIOS settings for mere mortals? ^^
So you are in >700FSB club?) No jokes, great achievement. What was your air limit?
great
Epic work!
One of 2 REX's to do 700+ ! Killer job Griff
Welcome to 700Mhz Club :) Bravo GRIFF !!!
Thank you guys. With this cpu on Cascade and NB on air I haven't tried. I will try in the coming days. Impression that I am limited by the CPU. In my opinion the lack of over 700 results due to the cost and rarity of these boards. I have 3 other non-functioning ones. Two of which have SB dead. Let's see how they will go up once they are repaired. I wanted to say thanks to Tapakah, he sold me this card because he didn't go over 600 of fsb. The problem was the lack of compound between the NB and the heat sink.
Well done! What temps on CPU PWM without heatsink?
Very nice work ! Grats !
-15 -25 on bios
amazing, still love this platform
So just like my NIB board I bought from L0ud. Here is the factory paste job
Crazy! How did I miss this...
You solve this problem with 1mm copper plate between NB and heat think or use this board with custom NB cooler.
since these boards have problems with SB (they fail without warning and reasons) I suggest putting a small heat sink on the SB too.
Interesting. Symptoms of SB death?
First case: - data lines of the usb ports or a usb port only in short or almost, normal resistance must be on the 1-10Mohm
Second case: -- heating, even minimal, of the SB from the card off, power supply connected to the 220V. It heats up because the internal circuit of the SB supplied with 5Vsb voltage has low or short resistance. Normally in this case the card does not switch on.
The second case also helps identify dead chipsets on modern platforms. If they burn your fingers after trying to turn the system on a couple times they are likely dead.
Third case: - SB overheating from the card on. It normally warms up so much that you can't hold your finger over it.
Symptoms preliminary to death: difficulty or inability to detect USB and HDD devices at startup.
Yes. It called HUB.
Veuillez vous identifier ou enregister pour commenter