Submission Details
Le score de leeghoofd sur HWBOT x265 Benchmark - 4k - Elite League
0.62 fps avec Intel Celeron G470 à 2210MHz
Position dans le classement
4144th
WR Rank:
4144th sur un total de 4321
9th
Global 1x CPU classement:
9th sur un total de 145
2nd
Celeron G470 classement:
2nd sur un total de 61
Points earned for overclocker league
-
Points Global (UGP)
9th utilisant 1 CPU
52.0 Points
-
Points Hardware (UHP)
2nd utilisant Celeron G470
40.0 Points
Points earned for team league
-
Points Global Team Power (GTPP) 8th en équipe utilisant 1 CPU
22.7 Points
-
Points Hardware Team Power (HTPP) 2nd en équipe utilisant Celeron G470
11.0 Points
Détails matériel
Détails Processeur
- Modèle: Intel Celeron G470 'Sandy Bridge'
- Cores: 2 210MHz(+10.50%)
-
Détails mémoire
- Type: 4096MB DDR3 SDRAM
- Fréquence: @ 1 031MHz
- Chronomètres CL7.0 7-7-18
Détails carte graphique
- Fréquence: MHz / MHz (Stock)
Détails carte mère
- Fabricant: ASUS
- Modèle: Maximus V Extreme
- Chipset: Z77
-
Commentaires récents
yosarianilives dit :
Is this the chip I sent you? :D
leeghoofd dit :
yep
ale belo dit :
yeah,nice work!
yosarianilives dit :
Nice! Do you have any advice for max bclk? I'll admit I'm kinda clueless and just use mostly auto voltages then put gpu in last slot on a board with plx chip.
yosarianilives dit :
Also are you running hypers?
rodrigoduralon dit :
haha yes, nice alby
SniperOZ dit :
Noooooo!!!......Nice man....
unityofsaints dit :
Verrry nice Alby, I gotta get binning these chips LN2 or SS btw?
leeghoofd dit :
SS, LN2 is too costly, single benchmark are runs of 40-45 mins, not happening for this old geezer
prebin on air for max bootable bclock, check IMC too, I had good bclockers with 1866 max mem speed, so no good :p
Carl will trash all the scores again... he can reach a real 0.62 for sure with his CPU
GeorgeStorm dit :
Nice work, LN2 on this would be insanity hah.
yosarianilives dit :
LN2 at -50 to -60c on sandy for a 45 minute run ?
I could see it helping mem tho, so theoretically could be useful for timings. Did you use hypers? I had no luck with them on sandy myself. I couldn't set as tight of tertiary timings as on PSC so my score ended up taking a hit despite tighter primaries.
unityofsaints dit :
Not every chip coldbugs in that range and not every SS can hold the right load temp. Ran LN2 for 32m on socket 939 at the weekend for 20 mins, 40 isn't too much of a stretch.
Oldscarface dit :
Nice one Alby!!!
aerotracks dit :
Nice score!
Alex Darkvenom dit :
Good work!
Dancop dit :
45 minutes of fun... WTF???
yosarianilives dit :
On single stage it's set and forget so I caught up on quite a few shows back when I took gold for this chip earlier in the year.
Noxinite dit :
Come on people a good L3014 could beat this on LN2.
Evasion dit :
Nice Cpu, you've rocked it :D
ginger_nuts81 dit :
Kudos. Great work.
unityofsaints dit :
@Noxinite not sure if joking but in case you aren't: x265 is AVX-based and the L3014 doesn't have this instruction so it has no chance in this bench
Noxinite dit :
https://hwbot.org/submission/3909790
I'm sorry, I think you were mistaken.
yosarianilives dit :
Celerons don't have avx either
havli dit :
AVX makes no difference on Sandy Bridge (in x265)... SSE4 is the key.
yosarianilives dit :
Not even on core i does avx matter? only the avx2 on haswell+ is where that instruction matters? Or do you just mean that Celerons don't have AVX?
havli dit :
I was developing the benchmark on SB-E platform and at the time I performed a lot of testing. AVX had zero inpact on performance when running on SB (Core and Xeon series - those do support AVX). You can try it yourself - either by using Windows 7 non-SP and SP1... or the built-in function of x265, the CPU features override (which is much more convenient).
AVX2 on Haswell and later improves the performance a lot. AVX1 perhaps helps too on some architectures, but certainly not on SB/IB.
Veuillez vous identifier ou enregister pour commenter