Submission Details
xxbassplayerxx的SuperPi - 1M成绩
- 极限联盟
5sec 891ms 和 Intel Core i7 6700K 在 6200MHz
排名位置
n/a
全球排名
41st
Core i7 6700K 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not xxbassplayerxx's best submission
-
硬件分数(UHP)
41st 使用 Core i7 6700K
32.8 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not Overclock.net's best submission
0.0 积分
-
硬件战队能量分(HTPP) Not Overclock.net's best Core i7 6700K submission
0.0 积分
多媒体部分
- 屏幕截图
-
- GA-Z170X-SOC Force
-
- Trident Z
-
硬件细节
CPU细节
- 型号： Intel Core i7 6700K 'Skylake-S'
- 散热: Liquid Nitrogen
- Cores: 6,200MHz(+55.00%)
-
-
内存细节
- Manufacturer: G.SKILL
- 产品: Trident Z
- 散热: Air (Stock)
- 类别 16330MB DDR4 SDRAM
- 速度：: @ 1,866MHz
- 计时： 12-12-12 28 1T
-
显卡细节
- 速度：: MHz / MHz ()
主板细节
- 厂商: GIGABYTE
- 型号： GA-Z170X-SOC Force
- 散热: Air (Stock)
- 芯片组： Z170
-
近期的评论
Better... but still no good!
It's got potential !
whats real volts?
1.75V. I'm having the same issue with this chip that I had with my 6600K. Splave has tested that one for over 6.4GHz in HWBot Prime... For the life of me I can't get these chips even remotely stable over 6GHz. The highest I could pass HWBP on this one was 5.7GHz but it was fully capable of running 5G HWBP at 1.35V on water, before delid. Adding voltage doesn't seem to help, either.
I may be snagging an OCF today to see if it's the board (or me being unable to clock well on the board).
EDIT: Real volts were what was shown. Looks like I forgot. When Extreme mode is enabled on CPU-Z, it usually shows 1.35V or something. I thought that was what was happening.
go BP!! http://chmod755.sdf-us.org/bossplayer.html
Sounds like bad contact. Can happen if you keep the glue on both pcb and ihs and use "normal" amount of tim on the die. I always scrape off the glue on ihs, keep it on the pcb. Perfect mount every time.
Interesting thought... I'm using "normal" TIM and have glue on both.... Picked up a M8G and setting it up to go cold so we'll see!
check temps in xtu (when cold)
Rauf, temps were fine
请登录或注册后才能评论