Submission Details
nickolp1974`s Reference Frequency Ergebnis
- Extreme League
675.32 MHz mit ASUS Rampage Extreme at 675.3MHz
Ranglisten Position
76th
WR Rang:
76th von 2877
76th
Globale Rangliste
76th von 2877
25th
Rampage Extreme Rang:
25th von 144
Points earned for overclocker league
-
Globale Punkte (UGP)
76th
-
Hardware Punkte (UHP)
25th mit Rampage Extreme
0.0 Punkte
Points earned for team league
Mediengallerie
- Verifikations URL, Bilder, Checksumme
- http://valid.canardpc.com/25gsgw
Hardware Details
CPU Details
- Model: Intel Core 2 Duo E8400 'Wolfdale-6M'
- Kühlung: Single Stage Phase Change
- Cores: 4.051Mhz(+35.03%)
-
Arbeitsspeicher Details
VGA Details
- Geschwindigkeit: Mhz / Mhz (Bestand)
Mainboard Details
- Hersteller: ASUS
- Model: Rampage Extreme
- Kühlung: Water (Custom)
- Chipsatz: X48
-
Neueste Kommentare
Thanks Lewis for a bit of guidance on this![;)](https://community.hwbot.org/uploads/emoticons/wink.png)
No worries, top result bud![:)](https://community.hwbot.org/uploads/emoticons/smile.png)
Now we are talking.
Sweeeeet! That E84 needs cold and an x9 multi!![:D](https://community.hwbot.org/uploads/emoticons/biggrin.png)
Cheers chaps, tried again and just couldn't quite validate at 690, water was warm though. As you say needs some cold!
sagt:
Dual channel too? You mad man, Nick!![:D](https://community.hwbot.org/uploads/emoticons/biggrin.png)
Good result fella. Get that NB cold and it should go a bit further.![:)](https://community.hwbot.org/uploads/emoticons/smile.png)
This is just for a FSB valid Kenny, CPU has potential though![;)](https://community.hwbot.org/uploads/emoticons/wink.png)
But the CPU and board both obviously have good FSB in them![:D](https://community.hwbot.org/uploads/emoticons/biggrin.png)
True that! Better than the ones I have here anyway![xD](https://community.hwbot.org/uploads/emoticons/laugh.png)
Nice!!
If you guys are interested in helping the competition, I'd love to know some tips to get FSB up there. I was able to get about 675 but only got 671 validated. This was with a cold NB.
All baring the main voltages settings were left at auto, PLL volts was the key and on this chip it needed to be low.
Bitte einloggen oder register to comment.