Bogd4n sagt:

9 years ago –

You didn't upload the right screenshot. In this ss you have 17.797 @4608 Mhz.

The Mutt sagt:

9 years ago –

Your right, I'll change it when I get back home.

The Mutt sagt:

9 years ago –

Now it´s the right screenie.

Bogd4n sagt:

9 years ago –

You could'n run wprime32m at same settings as spi1m? As far as I know wprime32m works similar with spi1m in terms of max freq.

ObscureParadox@3XS sagt:

9 years ago –

I found when testing my E2160 that one core was much more stable than another, I'm sure this is the case here which is why he can run the single threaded test at a higher freq.

On a side note what sort of temp does your cascade go down to? I only ask because I believe these CPUs cold bug around -110c on average.

Blackbolt sagt:

9 years ago –

Nice Run ,use Win Vista for WPrime is a lot faster

The Mutt sagt:

9 years ago –

I found when testing my E2160 that one core was much more stable than another, I'm sure this is the case here which is why he can run the single threaded test at a higher freq.

 

On a side note what sort of temp does your cascade go down to? I only ask because I believe these CPUs cold bug around -110c on average.

Same here, one core is better. I think my cascade drops to about -86 att full load with this CPU. It seems that it likes temps under -90 because it´s totally stable when in idle and in singel threaded benchmarks below -90 but get unstable when temps rise above that.

Will give it another try with Vista if I can find the install disc but first I´ll have to get some LN2 and break 5ghz.

ObscureParadox@3XS sagt:

9 years ago –

Same here, one core is better. I think my cascade drops to about -86 att full load with this CPU. It seems that it likes temps under -90 because it´s totally stable when in idle and in singel threaded benchmarks below -90 but get unstable when temps rise above that.

 

 

Will give it another try with Vista if I can find the install disc but first I´ll have to get some LN2 and break 5ghz.

I have a copy of a custom vista if you want me to send you an ISO tonight?

But interesting that it doesn't seem to like going below -90.

The Mutt sagt:

9 years ago –

Sorry, my bad english. under=below so it likes temps below -90.