Submission Details
S_A_V的3DMark Vantage - Performance成绩 - 极限联盟
16348 marks 和 AMD Super Overclock Radeon HD 5770 在 1300/1400MHz
排名位置
n/a
全球1x GPU排名:
33rd
Radeon HD 5770 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not S_A_V's best submission
-
硬件分数(UHP)
33rd 使用 Radeon HD 5770
35.1 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not Team Russia's best submission
0.0 积分
-
硬件战队能量分(HTPP) Not Team Russia's best Radeon HD 5770 submission
0.0 积分
硬件细节
CPU细节
- 型号: Intel Core i7 2600K 'Sandy Bridge'
- 散热: Water (Custom)
- Cores: 5,300MHz(+55.88%)
-
内存细节
- Manufacturer: G.SKILL
- 产品: PerfectStorm
- 散热: Air (Custom)
- 类别 4096MB DDR3 SDRAM PC3 16000
- 速度:: @ 2,260MHz
- 计时: CL7.0 8-7-20 1T
-
显卡细节
- 型号: GIGABYTE Radeon HD 5770 (Juniper) AMD
- 散热: Liquid Nitrogen
- 速度:: 1,300MHz (+52.94%) / 1,400MHz (+16.67%)
-
主板细节
- 厂商: ASUS
- 型号: Maximus IV Extreme
- 散热: Air (Stock)
- 芯片组: P67
-
近期的评论
S_A_V 评价他自己的分数:
Vgpu=1.55V, Vmem=1.85V, OCP-mod, No CB, CBB=-100°C. Thanx to ASUS for Maximus IV Extreme
sebro 说:
Sehr gut!
Massman 说:
Impressive clocks!
cyclone 说:
S_A_V I wish you tried 'overclocking' the power circuit a little bit -)
pencil mods again?
S_A_V 说:
This time only OCP-mod by pencil
On SOC-series of Gigabyte voltages can be adusted via I2C using RivaTuner v2.25 to control dual-channel current DAC (it marked as "S11" on PCB) connected to feedback-pins of the voltage controllers.
MaJ0r 说:
P.S. Congrats, as always excellent work!
Do you meant Riva 2.24c or I miss something? Where can I find RivaTuner 2.25? Thanks in advanceS_A_V 说:
No, I mean 2.25, which is still unreleased (and probably never will be).
2.24c supports radeon 4xxx or older cards. Only 2.25 can access to I2C on 5xxx cards.
Any other tools (including latest MSI Afterburner) don't support "S11" current DACs.
Thanks
MaJ0r 说:
Seems version 2.25 is a secret for ordinary overclockers. I couldn't find it
Eeky NoX 说:
Great job here, but it ain't the highest clocks I'm looking that card seriously and need to learn...
riska 说:
Just ad the ic2 id string in the rivatuner ini file then u have the volt controll you want
OGS 说:
Hello can you send me the mods ty
S_A_V 说:
Vgpu-OCP-mod: pencil R699 resistor or solder 100k VR between pin25 (IMAX) of uP6204B and ground
Vgpu-mod: VR between pin20 (FB) of uP6204B and ground
Vmem-mod: VR between pin6 (FB) of uP6101B and ground
请登录或注册后才能评论