Legend
This profile uses the same processor, at the same or lower speed, but has a higher XTU score. You might want to check out these profiles and try to apply it to your system.
The profile you have currently selected. Details are shown below the chart.
The profile you are analyzing. Settings of this profile are compared to the one you have selected.
ProKoN`s Core i5 3470 at 4159.8MHz with an ASUS Maximus V Formula motherboard
Recent Comments
unityofsaints says:
Great run! It seems we haven't found the top score for this chip yet
ProKoN says:
Thank you sir. Im sure someone will top this with Lasso + 2000mhz samsung ic's
bolc says:
Hi
nicely done ! What is your secret for 108.8 blck?
yosarianilives says:
It all depends on the board and cpu. Bin harder
bolc says:
we have the same board, on paper at least...
yosarianilives says:
Both cpu and board need to be binned for bclk.
bolc says:
Yes sure.
One thing I am heavily suprised about, and I can/will substantiate my thoughts with screenshots if you want, is that benching with CAS7 always gives much much worse scores for me when using XTU !!!
For instance, the 3470 benched at 107.8-108ish bclk, and 2200+ CAS7 = 7-10-6-24-1T trfc=86 and fairly tight other subs, will barely give 798-800pts, while the same frequency on CAS8 (8-10-8-24-1T or 8-10-8-26-1T) will make an easy 850+ pts on 2133 or 2200 ram multiplier.
If I bench with Prokon (2185 Mhz @ 7-10-6-24-1T) or with Luumi's settings (2300 Mhz @ 7-10-6-28-1T http://hwbot.org/submission/3680063_luumi_xtu_core_i5_3470_853_marks), I will never exceed 800 pts, no matter if I use the 2000 Mhz (1:10) ram multiplier like Prokon does, or the 2133 Mhz 1:8 multi like Luumi does...
The same happens on Haswell. I tried Win7 64 or Win7 32 (btw no difference between both... and no difference between 8.1 32 or 10 32 and 7 64... superfetch + maxmem applied)
Any thoughts why they can, and why I can't?
Ps: My ram can handle 2300+ cas7 (g.skill pi 2200cas7) and 2600+ cas8
yosarianilives says:
Only thing I can think of is if you aren't setting ALL timings manually it trains looser secondaries at cl7.
bolc says:
I fix them all manually. trrd 4 trtp 4 twtr 7 twr6 trfc 86 tckl 4 twcl8 faw 18 for secondary
mrc fast boot is enabled on my board i think, can put it off to see if...
nonetheless, subtimings can make 50+ pts difference ...?
bolc says:
the error is listed..., thanks to Wizerty and Strat:
tWCL needs to be <= tCL, so 7 at most...
yosarianilives says:
TY! I'll keep that in mind, especially as I push my g470 in the next few days!
bolc says:
same here when I will get my 2 precious
where did you get yours ?
Please log in or register to comment.