Zeichenerklärung
Dieses Profil nutzt den gleichen Prozessor bei identischem oder langsameren Takt, hat aber ein höheres XTU Ergebnis. Vielleicht möchtest Du diese Profile auf Deinem System ausprobieren.
Dein gerade ausgewähltes Profil. Details werden unter der Tabelle angezeigt.
Dieses Profil wird gerade von Dir analysiert. Die Einstellungen werden mit dem von Dir gewählten Profil verglichen.
ProKoN`s Core i5 3470 auf 4159.8MHz mit einem ASUS Maximus V Formula Mainboard
Neueste Kommentare
unityofsaints sagt:
Great run! It seems we haven't found the top score for this chip yet
ProKoN sagt:
Thank you sir. Im sure someone will top this with Lasso + 2000mhz samsung ic's
bolc sagt:
Hi
nicely done ! What is your secret for 108.8 blck?
yosarianilives sagt:
It all depends on the board and cpu. Bin harder
bolc sagt:
we have the same board, on paper at least...
yosarianilives sagt:
Both cpu and board need to be binned for bclk.
bolc sagt:
Yes sure.
One thing I am heavily suprised about, and I can/will substantiate my thoughts with screenshots if you want, is that benching with CAS7 always gives much much worse scores for me when using XTU !!!
For instance, the 3470 benched at 107.8-108ish bclk, and 2200+ CAS7 = 7-10-6-24-1T trfc=86 and fairly tight other subs, will barely give 798-800pts, while the same frequency on CAS8 (8-10-8-24-1T or 8-10-8-26-1T) will make an easy 850+ pts on 2133 or 2200 ram multiplier.
If I bench with Prokon (2185 Mhz @ 7-10-6-24-1T) or with Luumi's settings (2300 Mhz @ 7-10-6-28-1T http://hwbot.org/submission/3680063_luumi_xtu_core_i5_3470_853_marks), I will never exceed 800 pts, no matter if I use the 2000 Mhz (1:10) ram multiplier like Prokon does, or the 2133 Mhz 1:8 multi like Luumi does...
The same happens on Haswell. I tried Win7 64 or Win7 32 (btw no difference between both... and no difference between 8.1 32 or 10 32 and 7 64... superfetch + maxmem applied)
Any thoughts why they can, and why I can't?
Ps: My ram can handle 2300+ cas7 (g.skill pi 2200cas7) and 2600+ cas8
yosarianilives sagt:
Only thing I can think of is if you aren't setting ALL timings manually it trains looser secondaries at cl7.
bolc sagt:
I fix them all manually. trrd 4 trtp 4 twtr 7 twr6 trfc 86 tckl 4 twcl8 faw 18 for secondary
mrc fast boot is enabled on my board i think, can put it off to see if...
nonetheless, subtimings can make 50+ pts difference ...?
bolc sagt:
the error is listed..., thanks to Wizerty and Strat:
tWCL needs to be <= tCL, so 7 at most...
yosarianilives sagt:
TY! I'll keep that in mind, especially as I push my g470 in the next few days!
bolc sagt:
same here when I will get my 2 precious
where did you get yours ?
Bitte einloggen oder register to comment.