Submission Details
yosarianilives`s SuperPi - 32M score - Extreme League
10min 20sec 797ms with AMD Phenom II X2 570 BE at 6930MHz
Ranking position
n/a
Global rank:
1st
Phenom II X2 570 BE rank:
1st out of 10
Points earned for overclocker league
-
Global Points
Not yosarianilives's best submission
0.0 Points
-
Hardware Points
1st using Phenom II X2 570 BE
15.0 Points
Points earned for team league
-
Global Team Power Points (GTPP) Not Overclock.net's best submission
0.0 Points
-
Hardware Team Power Points (HTPP) 1st in team using Phenom II X2 570 BE
6.5 Points
Hardware details
CPU details
- Model: AMD Phenom II X2 570 BE 'Callisto' (2 cores active)
- Cooling: Liquid Nitrogen
- Cores: 6,930MHz(+98.00%)
Memory details
- Type: DDR3 SDRAM
VGA details
- Speed: MHz / MHz (Stock)
Recent Comments
yosarianilives says:
Forgot to select the active core ;(
TaPaKaH says:
How is this not under 10 mins with that CPU and NB clocks?
yosarianilives says:
Effi
I.nfraR.ed says:
Maybe back off the volts a little? It seems slow even on inefficient board, indeed. Perhaps the result will be better with a little lower clocks?
PS: VCore seems too high for what I've seen (feel comfortable with) when benching K10. On my older screens with the 970A-UD3 board, the vcore under load is much different than what cpuz shows idle, something under 1.9V, because that board has an enormous vdroop.
yosarianilives says:
We will see if chip runs again, was being fucky but everything was being fucky second day. Board can be fast but found out I need different bios. Os should be fun, it's perica. Did find out where the waza files were so will need to try waza, hopefully my crap ssd isn't too fast. Maybe I should plug in a hdd for waza lol
unityofsaints says:
What board was this? Can partially explain the efficiency issues.
yosarianilives says:
Was on the wrong bios apparently, but also no waza
unityofsaints says:
So secret board? ?
TaPaKaH says:
ASUS C4E, judging by CPU-Z validation
yosarianilives says:
Maybe on that session, not actually sure it was this cpu. Both my 570s validate the same. This 32m was c4f, I go through boards slightly slower than paste. Socket is wore out on this one, too much pressure and it drops a socket. So need to stock up on crosshairs againĀ
yosarianilives says:
C4E and c4f are fairly interchangeable for me, both can get good effi with right bios
Please log in or register to comment.