Submission Details
Nick Peyton的CPU Frequency成绩
- Apprentice League
6116.05 MHz 
和 AMD FX-8350 
在 6116MHz
排名位置
n/a
全球排名
n/a
FX-8350 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not Nick Peyton's best submission
0.0 积分
-
硬件分数(UHP)
Not Nick Peyton's best FX-8350 submission
0.0 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not apprentice overclockers of United Kingdom's best submission
0.0 积分
-
硬件战队能量分(HTPP) Not apprentice overclockers of United Kingdom's best FX-8350 submission
0.0 积分
硬件细节
CPU细节
内存细节
显卡细节
- 速度：: MHz / MHz ()
主板细节
- 型号： 990FX Extreme9
- 散热: Air (Stock)
- 芯片组： 990FX
硬盘细节
电源细节
- 厂商: Be Quiet!
- 电源: 850瓦
近期的评论
2nd ever Extreme Cooling Run (Dry Ice) Completed cinebench at speed above on single-core, but couldn't complete multi-core. As you can see from my screenshot; during the run the temp would always jump from -53 to about -13 (when it would crash). Is this normal; or a bad mount? I was measuring socket temps from hwinfo64. Thanks!
Properly applied TIM?
Yes, definitely. I used Thermal Grizzly Kryonaut. I spread it all over evenly (then added a "tiny" extra blob in the middle) too; for good measure.
I included a picture of how it looked after I removed it (at the end of the run).
How does that look to you guys?
TIM layer looks very thick. Next time you might want to try what I do: pre-heat the pot with a hot air gun or even a hairdryer and apply the paste on the pot, rather than on the cpu. Mount it, but twist a little before tightening the bolts.
I know Roman shows how "easy" it is to spread the Kryonaut with the supplied applicator, but in reality my Kryonaut looks much thicker and harder to spread compared to his video. It falls apart and the pieces stick to the applicator, rather than the IHS, so pre-heating the surface and the syringe helps to make it a little more liquid than it is. I'd say I'm rather disappointed by Kryonaut.
请登录或注册后才能评论