Submission Details
Gomeler的wPrime - 32m成绩 - 极限联盟
24sec 586ms 和 AMD Sempron 145 在 5964MHz
排名位置
15293rd
世界纪录排名
33rd
全球1x CPU排名:
27th
Sempron 145 排名:
Points earned for overclocker league
-
世界纪录分数(UWP)
15293rd
-
全球分数(UGP)
33rd 使用 1 CPU
-
硬件分数(UHP)
27th 使用 Sempron 145
36.9 积分
Points earned for team league
-
全球战队能量分 (GTPP) 21st 战队使用1 CPU
78.3 积分
-
硬件战队能量分(HTPP) 20th 战队使用Sempron 145
11.2 积分
硬件细节
CPU细节
- 型号: AMD Sempron 145 'Sargas'
- 散热: Liquid Nitrogen
- Cores: 5,964MHz(+113.00%)
显卡细节
- 速度:: MHz / MHz ()
主板细节
- 厂商: GIGABYTE
- 型号: GA-MA790X-UD4P
- 散热: Air (Stock)
- 芯片组: 790X
-
近期的评论
Gomeler 评价他自己的分数:
Only one of my Dominator PC2-8888C4 sticks is working =( Will have to try again in dual channel.
BeepBeep2 说:
That's a heck of a CPU right there, can't believe you to got the HTT up there so high. I remember hitting a wall around 330.
Gomeler 说:
On air this CPU walled around 360HTT. Under LN2 I was able to hit around 445HTT but the CPU was only stable through wPrime 32M at a maximum speed of around 6050MHz. I still need to test again in dual channel as I fear I am losing some efficiency in running single channel.
BeepBeep2 说:
As far as I remember memory doesn't play much role in wprime, if I were you I'd try to drop the CPUNB down to about 2000-3000 and also drop it's voltage to see if you can gain CPU frequency. Dual Channel will be faster but it likely won't be much.
TaPaKaH 说:
I don't know exact behavior with Corsair SPD, but max HTT is usually better if you flash your mems with SPD from some TeamGroup or Crucial modules
single/dual channel doesn't have any affect on efficency, you're losing more because of Vista - try WinXP with Luna theme with VGA drivers
Gomeler 说:
Thanks for the tips Sam. I wasn't HTT walled, more like the core was walled regardless of volts at around 6050MHz. I'll be retrying after CES with two sticks of D9GMH and a proper XP installation. I didn't use XP as I happened to have Windows Vista installed on that drive and decided to give it a go
请登录或注册后才能评论