Submission Details
Ginner`s 3DMark06 Ergebnis - Apprentice League
478 marks mit ATi Mobility Radeon 9600 Pro Turbo at 443/295MHz
Ranglisten Position
n.a.
Globaler 1x GPU Rang:
1st
Mobility Radeon 9600 Pro Turbo Rang:
1st von 1
Points earned for overclocker league
-
Globale Punkte (UGP)
Not Ginner's best submission
-
Hardware Punkte (UHP)
1st mit Mobility Radeon 9600 Pro Turbo
6.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not OcTeamDenmark's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 1st Im Team verwendet Mobility Radeon 9600 Pro Turbo
5.2 Punkte
Mediengallerie
- Verifikations URL, Bilder, Checksumme
- https://www.3dmark.com/3dm06/17994961
Hardware Details
CPU Details
- Model: Intel Pentium M 755 'Dothan-2048'
- Kühlung: Air (Custom)
- Cores: 2.400Mhz(+20.00%)(ref/imc/qpi: 100//120Mhz)
-
Arbeitsspeicher Details
- Kühlung: Air (Stock)
- Typ: 2048MB DDR SD-RAM
- Geschwindigkeit: @ 400Mhz
- Timings: CL2.5 3-3-7
VGA Details
- Model: Dell Mobility Radeon 9600 Pro Turbo (M10) ATi
- Kühlung: Air (Custom)
- Geschwindigkeit: 443Mhz (+31.45%) / 295Mhz (+21.40%)
Mainboard Details
- Kühlung: Air (Stock)
Neueste Kommentare
Khenglish sagt:
How did you get the 20% fsb overclock? I have only done 33% overclock via PLL hardmod. On the inspiron 8600 I can't get any software overclocking tool to read the clock generator. It would be great if I could add fine grain overclocking on top of the 33%. I have a respectable 745 CPU that does 2.4 GHz at 1.33V. Also it looks like your CPU throttled. There seems to be a hidden CPU power limit on the i8600 series that you need to disable with RMclock. I get 1K CPU scores in 3dm06.
Ginner sagt:
I used SetFSB 2.2.134.98, I can't remember which exact setting, since it's 8 months ago I did it. I won't be home to check until maybe next week. Though I curious as well to know what it took to hardmod til PLL chip :) All I can tell you right now, is that I can see from photos that it's a Cypress PLL chip. Will investigate and return with an answer.
Khenglish sagt:
Ah, I have a different IDT PLL. I found the Cypress PLL on mouser for $2.80. I'll buy it and switch it out. Messing with old cheap hardware prevents me from messing with and killing my $1k+ stuff. I'll be back at this system tomorrow and can get hardmod info. I think all I did though was solder pins 54 and 55 together. The resulting intermediate voltage gets interpreted as a 1 by the PLL on both frequency select pins. Beware that you memory likely can't handle 444 MHz. I knocked mine down to the 266 MHz strap for 355 MHz. Mobo datasheets here btw: http://www.s-manuals.com/notebook/dell_inspiron_8600
Khenglish sagt:
Actually the Mouser part listing is for 2000 part reels...
Khenglish sagt:
Yeah I did just solder the S0 and S1 pins together and that got me 533 fsb. Also, you can put 9600xt and 9700 mobile cores on these things: https://imgur.com/a/RuTX2ah
Bitte einloggen oder register to comment.