Submission Details
_12_`s 3DMark2001 SE Ergebnis - Elite League
137075 marks mit NVIDIA GeForce 9800 GT at 1044/1269MHz
Ranglisten Position
n.a.
Globaler 1x GPU Rang:
2nd
GeForce 9800 GT Rang:
2nd von 209
Points earned for overclocker league
-
Globale Punkte (UGP)
Not _12_'s best submission
0.0 Punkte
-
Hardware Punkte (UHP)
2nd mit GeForce 9800 GT
60.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not Team Russia's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 2nd Im Team verwendet GeForce 9800 GT
63.0 Punkte
Hardware Details
CPU Details
- Model: Intel Core i7 4790K 'Devil's Canyon'
- Kühlung: Cascade Phase Change
- Cores: 6.050Mhz(+51.25%)(ref/imc/qpi: 100//Mhz)
-
Arbeitsspeicher Details
- Manufacturer: G.SKILL
- Typ: 8192MB DDR3 SDRAM
-
VGA Details
- Model: GeForce 9800 GT (G92b) NVIDIA
- Kühlung: Cascade Phase Change
- Geschwindigkeit: 1.044Mhz (+74.00%) / 1.269Mhz (+41.00%)
Mainboard Details
- Hersteller: ASUS
- Model: Maximus VII Gene
- Chipsatz: Z97
-
Neueste Kommentare
nachtfalke sagt:
nice rotary´s have you in cascade , how much BTU it have , cm/rev? r407c or R410a?
_12_ sagt:
I have 2 rotary compr 9k btu on hi and low stage. Hi stage r22 low - r23. Low stage with captube - 0.8mm length 1.3mm = 350w heat load.And I change oil in comp's
nachtfalke sagt:
not big rotary but still enough for haswell , charge first stage with R404A or R507 and the second with R1150(etylen) is the best solution, if the first compressor are designed for R22, change the oil with POE oil before charge with R404/R507
_12_ sagt:
for haswell-e is also enough http://hwbot.org/submission/2703714_ 5400 is good for cascade.
nachtfalke sagt:
yes, because the test is not so long , but if you change on the monster gpu can´t hold good load:)
i have in progress 2x cascade : small one with compressor 21k btu in first stage and in second 17k btu ..i designed for 400W load at -100 ( R507a and R1150)
and another monster cascade have in first stage one compressor 25k BTU and second stage 22k BTU that will be load king
http://forum.lab501.ro/showpost.php?p=401733&postcount=39
_12_ sagt:
Wow, crazy cascade:))) for sailing?
nachtfalke sagt:
i´m not salled because is for me done by me..so i put inside lot of work and soul , both are designed with universal mounting kit( gpu/cpu ) , evaporators are 42mm diam / 60mm tall , i use thermostatic expansion valve in first stage for R507A and in second stage cap tube 1,2mm because at those large capacity rotary´s. and ofcourse R1150 for best temps , i expected -125* will see
if you asking about my monster SS , that is , 28ccm rotary 16k BTU rotary:D
http://forum.lab501.ro/showthread.php?t=12896
_12_ sagt:
No need Ln2 with such cascade. Good luck!
nachtfalke sagt:
that is the point , i pay lot for LN2 , that i made those cascade:D
regards!
barti27 sagt:
congratulates result
Bitte einloggen oder register to comment.