Submission Details
Pablocs08的3DMark 99 Max成绩 - 极限联盟
2982 marks 和 S3 ProSavageDDR 在 133/133MHz
排名位置
n/a
全球1x GPU排名:
4th
ProSavageDDR 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not Pablocs08's best submission
-
硬件分数(UHP)
4th 使用 ProSavageDDR
Points earned for team league
-
全球战队能量分 (GTPP) Not Argentina New Generation OC Team's best submission
0.0 积分
-
硬件战队能量分(HTPP) 4th 战队使用ProSavageDDR
2.4 积分
硬件细节
CPU细节
- 型号: Intel Pentium 4 2.8Ghz (Prescott, 133 FSB) 'Prescott-1M'
- 散热: Air (Stock)
- Cores: 3,163MHz(+12.96%)
-
内存细节
- Manufacturer: CORSAIR
- 产品: XMS
- 类别 DDR SD-RAM
- 速度:: @ 150MHz
- 计时: CL2.0 2-2-5
显卡细节
- 型号: ProSavageDDR (8D04) S3
- 速度:: 133MHz (+9.92%) / 133MHz (+∞%)
主板细节
- 厂商: ASUS
- 型号: P4VP-MX
- 芯片组: P4M266 (VT8751)
-
近期的评论
hubip 说:
Hi! Can I ask, how did you managed to overclock this mobo?
说:
@hibip, please, read this guide how to determine your's clock generator with pll (phase-lock-loop) device:
http://www.cpufsb.de/FSB.HTM
If you'll know what model is , you can use more "modern" programs for example SetFSB:
http://www13.plala.or.jp/setfsb/
or CPUFSB:http://www.cpufsb.de/
Photos available on google search are not good enough to determine the exact model, so you should to look straight on your motherboard and write down the chip name. Hope it'll help you
hubip 说:
Hi LUDEK. Actually I tried the CPUFSB, but with wrong IC number. In reality I didn't pay attention to read carefully the site, just as check the mobo for the right IC. So after your post I checked again everything, and you had right, now it's working !!!
I pushed a celeron D 330 to 3.1Ghz. 60°C is the load temperature, so I don't think I can go much further as the intel ark says 67°C Tcase for this cpu.
At the end, you helped me a lot so THANK YOU!!!
请登录或注册后才能评论