Submission Details
TerraRaptor`s Reference Frequency Ergebnis - Extreme League
239.6 MHz mit ASUS CUSL2 at 239.6MHz
Ranglisten Position
n.a.
Globale Rangliste
2nd
CUSL2 Rang:
2nd von 20
Points earned for overclocker league
-
Globale Punkte (UGP)
Not TerraRaptor's best submission
-
Hardware Punkte (UHP)
2nd mit CUSL2
10.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not Team Russia's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 2nd Im Team verwendet CUSL2
6.3 Punkte
Mediengallerie
- Verifikations URL, Bilder, Checksumme
- http://valid.canardpc.com/show_oc.php?id=2454014
Hardware Details
CPU Details
- Model: Intel Pentium III EB 733Mhz (s370) 'Coppermine-256'
- Kühlung: Single Stage Phase Change
- Cores: 1.317,8Mhz(+79.78%)
-
Arbeitsspeicher Details
- Kühlung: Air (Stock)
VGA Details
- Model: Radeon 9550 (RV350) ATi
- Kühlung: Air (Stock)
- Geschwindigkeit: 250Mhz / 200Mhz (Bestand)
Festplatten Details
- Serie: S596 SSD (JMF616 controller)
-
Netzteil Details
- Netzteil: 550 Watt
Neueste Kommentare
Stermy57 sagt:
Terraptor i have a problem with my CUSL2, it blocked me at 220Mhz but i not understand why -.-
The CPU can go on but the mobo blocked me also if i set on setFSB or in the BIOS 230Mhz
the mobo run the OS run well but CPU-Z show me only 220Mhz
How did you do?
TerraRaptor sagt:
haven't ever met this problem. Tried another bios? Does aida show the same?
Stermy57 sagt:
i tried all bios for CUSL2 even the "evil inside Bios"
Maybe is a bug of CUSL2 but not for all version...
I have ASUS CUSL2 rev 1.02 with green capacitors...
You? thanks terraraptor
TerraRaptor sagt:
i don't remember capacitors that my cusl had - soldered other ones. Try cpufsb then - maybe it will override the limit.
Christian Ney sagt:
Depend on the clockgen you have.
Stermy57 sagt:
i tried it later thanks terrraraptor
Uhh i not understand, can you explain me?
Thanks ney
Christian Ney sagt:
On the motherboard there is a chip that is called a clockgen (clock generator).
This is a clockgen for exemple:
If your clockgen can only go up to 220 MHz then you can't do anything about it, you are "hardware" limited
Stermy57 sagt:
i yes i know it
CUSL2 have ICS 94201CF
So if all CUSL2 have this clockgen, why my CUSL2 can't go over?
Christian Ney sagt:
Maybe not all have the same one that's the thing
Had several times the exact same s370 board (rev) but all had a different clockgen. So maybe it's the same for the CUSL2.
Stermy57 sagt:
uhhh interesting...
maybe is true....
Turrican sagt:
just put a heatsink on the clockgen and cool it as good as possible, then the "hardware" limit is no problem anymore. it will clock way higher then.
Christian Ney sagt:
You can't bypass like lol
Gigioracing sagt:
also my 2 Cusl do max 220 fsb :-(
Christian Ney sagt:
Is it a limit in the software/bois you can set or you can set over 220 but it doesn't work/crash ?
Stermy57 sagt:
you can set a fsb over 220Mhz but it doesn't work....
I can do a video if you want
Christian Ney sagt:
When you say it doesn't work, you mean ?:
- doesn't apply
- crash
- does nothing
What tools have you tried, do you have higher values than 220 in the BIOS ?
Stermy57 sagt:
I have this problem like gigioracing even when i use Celeron Coppermine-128 with bus at 66Mhz...
If i start from 66Mhz the mobo blocked me at 108Mhz but if i start from 100Mhz FSB i have no problem and i can go over the CPU's limit.
I have this problem with setFSb but even if i set the fsb on the BIOS is the same
The problem is that doesn't apply
you set the fsb but does not change...
Christian Ney sagt:
Hum,
Try this http://www.cpufsb.de/index.html
Even if you set 225 MHz in the BIOS you have 220 in Windows ?
Stermy57 sagt:
I will try it later
Yes, and sometimes even less than 220 Mhz... blocked me at 218/219Mhz it's very strange
havli sagt:
I had the same problem with my CUSL2-C few months ago. I tried to get decent SDRAM clock (2:3 divider) and it was impossible to pass ~ 100MHz FSB. When I set more, the real clock remains at 100 - checked in CPU-Z, aida64.
HW:
CUSL2-C rev. 1.02 (ICS 94201DF), modded "evil inside" BIOS
PIII coppermine, 133MHz FSB - tried more of them, same results
PC133 CL2 SDRAM - validated at > 170MHz on different MB
Bitte einloggen oder register to comment.