Like thisSubmission Details
SteveRo`s PCMark05 (alpha) Ergebnis
- Extreme League
39813 marks mit Intel Xeon E7 2860 at 4657.8MHz
Ranglisten Position
151st
WR Rang:
151st von 5446
5th
Globaler 10x CPU Rang:
5th von 11
1st
Xeon E7 2860 Rang:
1st von 1
Points earned for overclocker league
-
Weltrekord Punkte (UWP)
151st
-
Globale Punkte (UGP)
5th mit 10 CPU
-
Hardware Punkte (UHP)
1st mit Xeon E7 2860
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not XtremeSystems's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 1st Im Team verwendet Xeon E7 2860
0.0 Punkte
Mediengallerie
- Bildschirmphoto
-
- Verifikations URL, Bilder, Checksumme
- http://3dmark.com/pcm05/3149462
Hardware Details
CPU Details
- Model: Intel Xeon E7 2860 'Westmere-EX'
- Kühlung: Air (Custom)
- Cores: 4.657,8Mhz(+105.55%)
-
-
Arbeitsspeicher Details
- Kühlung: Air (Stock)
- Typ: 12288MB DDR3 SDRAM
- Geschwindigkeit: @ 1.606Mhz
- Timings: CL6.0 7-7-20 1T
VGA Details
- Model: Radeon HD 7970 (Tahiti) AMD
- Kühlung: Air (Stock)
- Geschwindigkeit: 925Mhz / 1.375Mhz (Bestand)
-
Mainboard Details
- Model: Classified SR-2 (270-WS-W555)
- Kühlung: Air (Stock)
- Chipsatz: 5520
Neueste Kommentare
Again - this is not an E7 2860 but one X5687 (4 cores) and one E5645 (6 cores) when combined on an SR-2 is 10 cores, run at 2 core each to reduce heat and stress. I think this should be a legit submission for ten cores but certainly not as an E7 – perhaps a moderator could please create a new cpu category? I vote for “SR-2 Mutt”! Let me know - I will delete this and resubmit under a more proper cpu name, thanks! Storage is Areca 1880/4GB/15xR0 Acard 9010 :)
Very nice, I was wondering if you were gonna run pcm05 with that config...
Some sort of HYBRID category for such ingenious configurations is a great idea.
There are 3 GTX6 and 3 ripjaws ? nice one...nice timings for 12gb
^^ 3x2GB Dominator GT 2kC7 and 3x2GB Ripjaws 2133C7 - for this bclock - this was the max memory multiplier the mobo gave me.
Nice one
I was saying because there are too many modules running at the same freq...I cant reach 2kC7 with more than 2 modules on p67 ):
No wprime at this clocks ?
very slick, Steve:)
Raul - With this setup you can only get these clocks by running only 2 core on each chip, if you go to full cores and HT-on you get 18x multi for both.
Bitte einloggen oder register to comment.