Ok...I figured out what the problem is. Disabling System Info DOES NOT fix it. The problem is with the size of the verification file being too big. The way you make sure it isn't too big is by NOT ADJUSTING THE SCREENSHOT QUALITY TOO HIGH...UNLESS YOU ARE GOING TO SAVE IT AS A JPG. IF YOU ARE SAVING IT AS A PNG YOU NEED TO HAVE THE QUALITY SET AT LEAST 2 DOTS BELOW HIGHEST. Having the screenshot quality set too high while saving it as a PNG causes the verification file to be too big. If you save it as a JPG you can max out the screenshot quality setting. Again...having System Info enabled does not cause a problem. For proof see the verification screenshot of my score saved as a PNG(@ 2 dots below max quality) with System Info enabled. ashttp://hwbot.org/submission/3613535_mrgenius_aquamark_radeon_r9_280x_366793_marks
"Invalid data file: Unable to parse the datafile"
I have the same problem. Any result file, saved by system with the AM2NF3-VSTA board can't be uploaded. The Picture quality setting dones not affect to this. The file size is about 150-250 KB.
just did another run on the daily, with systeminfo on the datafile goes over 1mb and is rejected. Without syteminfo and opting for jpeg it shrinks to 116KB and is accepted by HWBot API
I am trying to bench an old PC with win xp and screenshot is in png format in my case. File is about 5MB. I can press "save to kesktop" button before test and file without a resaults is good. File, saved after bench is usually about 5MB and "Invalid data file: Unable to parse the datafile"
I have s370 mobo, agp version of geforce 6800gs and clean windows xp. file 0.hwbot (saved before testing) is good. I think the problem is not in hardware or non-latin digits in the paths.
It is funny. I tried to submit a result of my main PC with 2.5k monitor. I got a "413 Request Entity Too Large" result in PNG mod and "Invalid data file: Unable to parse the datafile" in JPEG. Report with PNG file inside is about 14MB and JPEG version is only 7KB.
How to upload data file i am also same by IdeaFix user says same as PNG finle is 14mb so i change it Jpeg file it is only 15~16kb this is also not upload it
how to upload data file ?
Veuillez vous identifier ou enregister pour commenter
Ok...I figured out what the problem is. Disabling System Info DOES NOT fix it. The problem is with the size of the verification file being too big. The way you make sure it isn't too big is by NOT ADJUSTING THE SCREENSHOT QUALITY TOO HIGH...UNLESS YOU ARE GOING TO SAVE IT AS A JPG. IF YOU ARE SAVING IT AS A PNG YOU NEED TO HAVE THE QUALITY SET AT LEAST 2 DOTS BELOW HIGHEST. Having the screenshot quality set too high while saving it as a PNG causes the verification file to be too big. If you save it as a JPG you can max out the screenshot quality setting. Again...having System Info enabled does not cause a problem. For proof see the verification screenshot of my score saved as a PNG(@ 2 dots below max quality) with System Info enabled. ashttp://hwbot.org/submission/3613535_mrgenius_aquamark_radeon_r9_280x_366793_marks
"Invalid data file: Unable to parse the datafile" I have the same problem. Any result file, saved by system with the AM2NF3-VSTA board can't be uploaded. The Picture quality setting dones not affect to this. The file size is about 150-250 KB.
Nah.
I have a million subs in with that board.
Turn off sys info in Aquamark you have to do that with other hardware as well not just the AM2NF3-VSTA
Same Problem, i try Submit, but no affect - unable to parse data file ?! I turned System Info on/off, no affect..
Try to select to save in different folder perhaps on a different drive and type in the file extension manually.
Did you try disabling system info?
I did this "Disabling system info". And got an error again - "valid data file: Unable to parse the datafile" What's going on, friends?
Works fine here.... no clue what is up with your savefiles lads
Make sure file path and file name contains no Cyrillic letters. I would also make sure installation path of aquamark also be in Latin letters only
Thank.
I'll see.
New 2020 scores: Require CPU-Z 1.91 or newer version New 2020 scores: Full desktop screenshot required ( no clipping)
No non_latin symbols in path, no system info, different levels of compression... same result - Invalid data file: Unable to parse the datafile
How big is your datafile?
just did another run on the daily, with systeminfo on the datafile goes over 1mb and is rejected. Without syteminfo and opting for jpeg it shrinks to 116KB and is accepted by HWBot API
I am trying to bench an old PC with win xp and screenshot is in png format in my case. File is about 5MB. I can press "save to kesktop" button before test and file without a resaults is good. File, saved after bench is usually about 5MB and "Invalid data file: Unable to parse the datafile" I have s370 mobo, agp version of geforce 6800gs and clean windows xp. file 0.hwbot (saved before testing) is good. I think the problem is not in hardware or non-latin digits in the paths.
It is funny. I tried to submit a result of my main PC with 2.5k monitor. I got a "413 Request Entity Too Large" result in PNG mod and "Invalid data file: Unable to parse the datafile" in JPEG. Report with PNG file inside is about 14MB and JPEG version is only 7KB.
How to upload data file i am also same by IdeaFix user says same as PNG finle is 14mb so i change it Jpeg file it is only 15~16kb this is also not upload it how to upload data file ?
Veuillez vous identifier ou enregister pour commenter