Zeichenerklärung
Dieses Profil nutzt den gleichen Prozessor bei identischem oder langsameren Takt, hat aber ein höheres XTU Ergebnis. Vielleicht möchtest Du diese Profile auf Deinem System ausprobieren.
Dein gerade ausgewähltes Profil. Details werden unter der Tabelle angezeigt.
Dieses Profil wird gerade von Dir analysiert. Die Einstellungen werden mit dem von Dir gewählten Profil verglichen.
superpatodonaldo`s Core i7 5960X auf 4900MHz mit einem GIGABYTE GA-X99-SOC Champion Mainboard - 20°C
Neueste Kommentare
superpatodonaldo Kommentierte sein eigenes Ergebnis:
win7
nachtfalke sagt:
20 degree load at only 1.344vcore? seems your SS it has problem..
superpatodonaldo sagt:
do you have a 5960x under SS to verify xtu at 1,345V 4,9GHz?
so I can check...
in my memory at that time the SS wasn't built for heavy loads
nachtfalke sagt:
Check my Submission with 5930k at 1.5vcore real DMM 1.53V
Gesendet von meinem SM-G930F mit Tapatalk
superpatodonaldo sagt:
sub seen
btw have you ever manage a 8cores?
nachtfalke sagt:
Dont have 5960x but it's same arhitecture...20 load i dont have even at 1.67 vcore......
Gesendet von meinem SM-G930F mit Tapatalk
superpatodonaldo sagt:
8cores is very hot
I know you built a very strong SS ;-)
I'm waiting for mine, alexmx is tuning it for me; but it will be for lower temp instead of heavy loads, 6700k ht off run smoothly at -55/-60°C
nachtfalke sagt:
is not important what temps you ran on the evaporators , the internal chip temp are important , so i mean DELTA T should be lowered as possible if you know how....for what you had -55 on evap and the chip are at + degree? check with real temp .....that mean heat exchanger between chip and evap are out of range!!!! my 6700k at 1.6v in XTU read all 0 degree ...that mean chip are under sub0 temp ....but my evap is at -48 that mean evap made a good heat exchange with the heat sources!!
superpatodonaldo sagt:
obviously always chech the internal chip temp.
With 6700k I had under sub0 temp on bench, still not running XTU.
I'll try when the SS will be ready
nachtfalke sagt:
my last SS is a beast , 2HP compressor , 1.2kg twin loop evap with dual cap tube.....it hold heavy loads without any problem ...haswell E chip at 1.55v real temps read -5 on all cores !!in heavy loads like wprime, cinebench ...
superpatodonaldo sagt:
nice one
Bitte einloggen oder register to comment.