Submission details
antome`s SuperPi - 32M score - Extreme League
4min 48sec 297ms with Intel Core i9 9900K at 6226MHz
Ranking position
n/a
Global rank:
n/a
Core i9 9900K rank:
Points earned for overclocker league
-
Global Points
Not antome's best submission
0.0 Points
-
Hardware Points
Not antome's best Core i9 9900K submission
0.0 Points
Points earned for team league
-
Global Team Power Points (GTPP) Not XtremeOverdrive OC team Italy's best submission
0.0 Points
-
Hardware Team Power Points (HTPP) Not XtremeOverdrive OC team Italy's best Core i9 9900K submission
0.0 Points
Hardware details
CPU details
- Model: Intel Core i9 9900K 'Coffee Lake-S'
- Cooling: Single Stage Phase Change
- Cores: 6,226 MHz (+72.94%)
-
Memory details
- Manufacturer: G.SKILL
- Product: Trident Z
- Cooling: Air (Stock)
- Type: 16384MB DDR4 SDRAM
-
VGA details
- Model: GeForce GT 710 (GK208) (GK208) NVIDIA
- Cooling: Air (Stock)
- Speed: 967 MHz / 900 MHz (Stock)
Mainboard details
- Manufacturer: ASUS
- Model: ROG Maximus IX Apex
- Cooling: Air (Stock)
- Chipset: Z390
-
Disk details
Power details
- Manufacturer: Antec
- Series: TruePower Quattro OC
- Power: 1,200 Watt
Recent Comments
antome commented on his own score:
6.2g 8c 1.52v real, SS by Alexmx
superpatodonaldo says:
I realized just now that this is the best result under SS phase. Congratulation for the chip and I don't forget to mention the phase realized by alexmx
antome says:
thanks Davide, as you said, the result was possible thanks to the SS made by alexmx
suzuki says:
Great score indeed,was targeting this one but no chance on my 7700k to even get close to him.
I hope this sunday will be a better day with the next cpu.
antome says:
@suzukithe time is good considering the ram frequency and timing, I can further improve another 2 seconds bringing the ram over 4100 12 11 but I prefer not to use ln2 mode with SS
suzuki says:
And another 4 s if you disable 6c and push another 100 mhz.
Even if you activate Ln2 mode you can set vdmi 1.2//pll termination 1.2// cpu standby voltage 1.2v // pll bandwith level 0 and you have normal temperature.
antome says:
@suzuki I know that I can set the standard voltages with active ln2, maybe I'll try, The cpu definitely scale again since I did not want to raise the voltage further
Please log in or register to comment.