Submission Details
antome`s SuperPi - 32M Ergebnis - Extreme League
4min 48sec 297ms mit Intel Core i9 9900K at 6226MHz
Ranglisten Position
n.a.
Globale Rangliste
n/a
Core i9 9900K Rang:
Points earned for overclocker league
-
Globale Punkte (UGP)
Not antome's best submission
0.0 Punkte
-
Hardware Punkte (UHP)
Not antome's best Core i9 9900K submission
0.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not XtremeOverdrive OC team Italy's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) Not XtremeOverdrive OC team Italy's best Core i9 9900K submission
0.0 Punkte
Hardware Details
CPU Details
- Model: Intel Core i9 9900K 'Coffee Lake-S'
- Kühlung: Single Stage Phase Change
- Cores: 6.226Mhz(+72.94%)
-
Arbeitsspeicher Details
- Manufacturer: G.SKILL
- Produkt: Trident Z
- Kühlung: Air (Stock)
- Typ: 16384MB DDR4 SDRAM
-
VGA Details
- Model: GeForce GT 710 (GK208) (GK208) NVIDIA
- Kühlung: Air (Stock)
- Geschwindigkeit: 967Mhz / 900Mhz (Bestand)
Mainboard Details
- Hersteller: ASUS
- Model: ROG Maximus IX Apex
- Kühlung: Air (Stock)
- Chipsatz: Z390
-
Festplatten Details
Netzteil Details
- Hersteller: Antec
- Serie: TruePower Quattro OC
- Netzteil: 1.200 Watt
Neueste Kommentare
antome Kommentierte sein eigenes Ergebnis:
6.2g 8c 1.52v real, SS by Alexmx
superpatodonaldo sagt:
I realized just now that this is the best result under SS phase. Congratulation for the chip and I don't forget to mention the phase realized by alexmx
antome sagt:
thanks Davide, as you said, the result was possible thanks to the SS made by alexmx
suzuki sagt:
Great score indeed,was targeting this one but no chance on my 7700k to even get close to him.
I hope this sunday will be a better day with the next cpu.
antome sagt:
@suzukithe time is good considering the ram frequency and timing, I can further improve another 2 seconds bringing the ram over 4100 12 11 but I prefer not to use ln2 mode with SS
suzuki sagt:
And another 4 s if you disable 6c and push another 100 mhz.
Even if you activate Ln2 mode you can set vdmi 1.2//pll termination 1.2// cpu standby voltage 1.2v // pll bandwith level 0 and you have normal temperature.
antome sagt:
@suzuki I know that I can set the standard voltages with active ln2, maybe I'll try, The cpu definitely scale again since I did not want to raise the voltage further
Bitte einloggen oder register to comment.