Détails du score
Le score de kristjan.krusic sur HWBOT Prime - Enthusiast League
816.47 pps avec Broadcom Broadcom BCM2835 (BCM2708) à 1550MHz
Position dans le classement
8977th
WR Rank:
8977th sur un total de 9188
438th
Global 1x CPU classement:
438th sur un total de 568
8th
Broadcom BCM2835 (BCM2708) classement:
8th sur un total de 67
Points earned for overclocker league
-
Points Global (UGP)
438th utilisant 1 CPU
-
Points Hardware (UHP)
8th utilisant Broadcom BCM2835 (BCM2708)
Points earned for team league
-
Points Global Team Power (GTPP) Not OC-Lab.si's best submission
0.0 Points
-
Points Hardware Team Power (HTPP) 8th en équipe utilisant Broadcom BCM2835 (BCM2708)
0.0 Points
Détails matériel
Détails Processeur
- Modèle: Broadcom Broadcom BCM2835 (BCM2708) 'ARM1176JZ(F)-S'
- Refroidissement: Air (Custom)
- Cores: 1 550 MHz (+121.43%)
Détails mémoire
- Type: 482MB
Détails carte graphique
- Fréquence: MHz / MHz (Stock)
Commentaires récents
kristjan.krusic a commenté son propre score:
Max voltage I could push was 2.22v. Sadly you can't boot the Pi at more then 2.1v so I had to lower the voltage at boot and instantly increase it to make it more stable. If someone has a fix for this plis private msg me. If you want help with doing something like this feel free to message me. (ps. no need for extreme cooling with the Pi B possibly also usable for 24/7 use).
kristjan.krusic dit :
Settings: CPU: 1550; GPU: 650; RAM: 700.
Adding more Mhz didn't really help because the CPU was the bottleneck. Will retry tomorrow with higher GPU/RAM clocks.
kristjan.krusic dit :
Setting the RAM and GPU to 775 doesn't help Also tried using the DDR2 memory voltage controller (can go up to 3.8v) still run into the 2.10v lock
Veuillez vous identifier ou enregister pour commenter