nachtfalke says:

7 year and 8 months ago –

20 degree load at only 1.344vcore? seems your SS it has problem..

superpatodonaldo says:

7 year and 8 months ago –

20 degree load at only 1.344vcore? seems your SS it has problem..

do you have a 5960x under SS to verify xtu at 1,345V 4,9GHz?

so I can check...

in my memory at that time the SS wasn't built for heavy loads

nachtfalke says:

7 year and 8 months ago –

Check my Submission with 5930k at 1.5vcore real DMM 1.53V

Gesendet von meinem SM-G930F mit Tapatalk

superpatodonaldo says:

7 year and 8 months ago –

Check my Submission with 5930k at 1.5vcore real DMM 1.53V

 

Gesendet von meinem SM-G930F mit Tapatalk

sub seen

btw have you ever manage a 8cores?

nachtfalke says:

7 year and 8 months ago –

Dont have 5960x but it's same arhitecture...20 load i dont have even at 1.67 vcore......

Gesendet von meinem SM-G930F mit Tapatalk

superpatodonaldo says:

7 year and 8 months ago –

Dont have 5960x but it's same arhitecture...20 load i dont have even at 1.67 vcore......

 

Gesendet von meinem SM-G930F mit Tapatalk

8cores is very hot

I know you built a very strong SS ;-)

I'm waiting for mine, alexmx is tuning it for me; but it will be for lower temp instead of heavy loads, 6700k ht off run smoothly at -55/-60°C

nachtfalke says:

7 year and 8 months ago –

8cores is very hot

I know you built a very strong SS ;-)

I'm waiting for mine, alexmx is tuning it for me; but it will be for lower temp instead of heavy loads, 6700k ht off run smoothly at -55/-60°C

is not important what temps you ran on the evaporators , the internal chip temp are important , so i mean DELTA T should be lowered as possible if you know how....for what you had -55 on evap and the chip are at + degree? check with real temp .....that mean heat exchanger between chip and evap are out of range!!!! my 6700k at 1.6v in XTU read all 0 degree ...that mean chip are under sub0 temp ....but my evap is at -48 that mean evap made a good heat exchange with the heat sources!!

superpatodonaldo says:

7 year and 8 months ago –

is not important what temps you ran on the evaporators , the internal chip temp are important , so i mean DELTA T should be lowered as possible if you know how....for what you had -55 on evap and the chip are at + degree? check with real temp .....that mean heat exchanger between chip and evap are out of range!!!! my 6700k at 1.6v in XTU read all 0 degree ...that mean chip are under sub0 temp ....but my evap is at -48 that mean evap made a good heat exchange with the heat sources!!

obviously always chech the internal chip temp.

With 6700k I had under sub0 temp on bench, still not running XTU.

I'll try when the SS will be ready

nachtfalke says:

7 year and 8 months ago –

obviously always chech the internal chip temp.

With 6700k I had under sub0 temp on bench, still not running XTU.

I'll try when the SS will be ready

my last SS is a beast , 2HP compressor , 1.2kg twin loop evap with dual cap tube.....it hold heavy loads without any problem ...haswell E chip at 1.55v real temps read -5 on all cores !!in heavy loads like wprime, cinebench ...

superpatodonaldo says:

7 year and 8 months ago –

my last SS is a beast , 2HP compressor , 1.2kg twin loop evap with dual cap tube.....it hold heavy loads without any problem ...haswell E chip at 1.55v real temps read -5 on all cores !!in heavy loads like wprime, cinebench ...

nice one