Submission Details
cnzdrn`s Geekbench3 - Multi Core score - Extreme League
3373 points with AMD Sempron 150 at 6133MHz
Ranking position
n/a
Global 1x CPU rank:
n/a
Sempron 150 rank:
Points earned for overclocker league
-
Global Points
Not cnzdrn's best submission
0.0 Points
-
Hardware Points
Not cnzdrn's best Sempron 150 submission
0.0 Points
Points earned for team league
-
Global Team Power Points (GTPP) Not BadBoysOC's best submission
0.0 Points
-
Hardware Team Power Points (HTPP) Not BadBoysOC's best Sempron 150 submission
0.0 Points
Media gallery
- Verification URL, image, checksum
- http://browser.geekbench.com/geekbench3/8703364
Hardware details
CPU details
- Model: AMD Sempron 150 'Sargas' (1 cores active)
- Cooling: Liquid Nitrogen
- Cores: 6,133MHz(+111.48%)
Memory details
- Manufacturer: GeIL
- Product: Black Dragon
- Cooling: Air (Stock)
- Type: 4096MB DDR3 SDRAM
- Timings: CL6.0 7-6-18 1T
VGA details
- Speed: MHz / MHz (Stock)
Mainboard details
- Manufacturer: ASUS
- Model: Sabertooth 990FX R2.0
- Cooling: Air (Stock)
- Chipset: 990FX
-
Recent Comments
ale belo says:
Trans sistor ftw! Amazing score dude!
Ilpingu says:
Great man ✌?
ObscureParadox@3XS says:
urgh..... Time to boot up the Rex again...
rsannino says:
GREAT SCORE !!!!! .... GRANDE!!!
Jumper118 says:
AMD Master Race
cnzdrn says:
Thanks guys
SparkysAdventure says:
Nice
M1RROR says:
Good score! but, where is verification link?
Gigioracing says:
AMD vs Intel . good job
cnzdrn says:
http://browser.geekbench.com/geekbench3/8703364
I.nfraR.ed says:
Nice one! In theory sempron + ddr3 would be untouchable for a Xeon. Hopefully I will try mine soon, already have it running up to 450+ HTT with DDR3 board, just need LN2 It also scores much higher in other benchmarks
sburnolo says:
Grande lavoro!!Complimenti.
unityofsaints says:
AMD back on top where they belong!
GeorgeStorm says:
Great score!
Alpi says:
Wow ! Awesome result ! Nice work, grats !
cnzdrn says:
You are right! With 6.3 ghz (450 htt your chip) i think you will get 3550-3625. You have very strong ram (gtx2 @ 6-6-6 based on your validation with m4a89gtd)
I tried cinebench r15, with 421x14,5 i made 152. Only one run with realtime, maybe can do better at same frequency.
Thanks to all!
suzuki says:
This will make L3014 very cheap in the future. No way the xeon can catch a ddr3 run.
unityofsaints says:
There is still GPUpi, CB, etc.
yosarianilives says:
r15 definitely gains from mem on these chips, just a small gain. Got to remember that at 6.7 on ddr2 it's just a few points behind l3014 on ddr3, and at 6.1 on ddr3 the 150 is about 10 points away from l3014. Definitely worth binning 890fx boards to find one that can support 6.5+ on a sempron.
bolc says:
that d be great
any sample taking dust on your cabinet to sell?
ObscureParadox@3XS says:
You can still get around 3500 with an L3014 if you maximise everything. This for sure isn't game over for the Xeon It's also almost impossible to get much faster than this with a Sempron on DDR3 because of the IMC limitations. All the same I'm really glad someone managed to get this fast with a Sempron, it for sure makes the game really intersting. I'm looking forward to the battle
suzuki says:
I am afraid to mod the cpu or motherboard :)).
will sacrifice a Ud3R which i have and works with ddr2,at least to have an ideea about what my cpu’s can do ,this are the only ones on skt 775 which are not tested.
bolc says:
removing socket notches is easy, but making holes in the cpu pcb is fine too, but is a bit more risky for the cpu if you never did this before. the cpu is more rare than the board so you might want to do the board instead
but but for a 3014, a REX is likely better, series 3000 are compatible with x38/48, so if you plan to REX it later, you may make notches.
as far as you need to go :
yosarianilives says:
Yeah I personally wouldn't have the balls to cut on a l3014 myself, cutting the plastic part of the socket is much lower risk and not nearly as scary as some other things I've done (mostly cutting the back off of an pcie x4 slot to run an x16 card.)
suzuki says:
@bolc -when it comes to such things, I have 2 left legs instead of hands,why risk it when I already know my potential ? :)). Will go to a local service and point out what they have to do, same with the mocf mod for coffee lake cpu's,
I.nfraR.ed says:
450 HTT is 900 mem and 6.5GHz with Sempron 150 (I have a promising one), so there's still a headroom for memory frequency.
Based on my testing on air, if it scales ok, then ~170cb might be possible. Don't know about Geekbench, but mem should definitely help. Not sure if the IMC would be a bottleneck, though. Have to test. Looking forward to the new scores as well, I can only watch at the moment. Don't forget Sabertooth is one of the worst boards for AM3 CPUs, at least for Pi, Geekbench and CB might be different.
Some examples (not perfect, but you get the point). Both are excellent benchers:
DDR2 + 4969MHz https://hwbot.org/submission/3252830_noxinite_cinebench___r15_sempron_145_119_cb
DDR3 + 4662MHz https://hwbot.org/submission/2518880_strunkenbold_cinebench___r15_sempron_145_120_cb
cnzdrn says:
Sabertooth is slow in geekbench. Compared to gigabyte 890fx based.
yosarianilives says:
I would think anything memory related would be heavily board dependant. There are a number of memory timings that are set by bios that you don't have access to set so certain boards will just perform better on platforms like AM3 where relatively few timings are exposed to the user. That's why for example the Crosshare IV Extreme has been shown to have better "IPC" than the Crosshair IV Formula in 32m and probably anything else that memory heavily impacts.
cnzdrn says:
And why you need to bin ram with 1:2 divider
ObscureParadox@3XS says:
No it's a very fair point. When I made my initial statement I forgot that this wasn't run at max multiplier, so there is a lot more wiggle room. Maybe I should get out my AM3 boards and get some testing done too. But for sure first things first is to maximize what I already have
unityofsaints says:
Even taking DDR3 into account Xeon will win. There's also some fuel left in the tank in terms of BCLK on the blue side
ObscureParadox@3XS says:
There's not that much left though Don't forget too that it's almost impossible to run good memory speeds with an L3014, the boards just don't like it, hence Luumi was only running single channel memory for his runs.
bolc says:
too bad I don t live around, i d do it for free, well after borrowing your cpu
Please log in or register to comment.