Détails du score
Le score de Bullant sur SuperPi - 32M - Elite League
9min 22sec 125ms avec Intel Core i3 2100 à 3387MHz
Position dans le classement
n/a
Classement général:
n/a
Core i3 2100 classement:
Points earned for overclocker league
-
Points Global (UGP)
Not Bullant's best submission
0.0 Points
-
Points Hardware (UHP)
Not Bullant's best Core i3 2100 submission
0.0 Points
Points earned for team league
-
Points Global Team Power (GTPP) Not Warp9-systems's best submission
0.0 Points
-
Points Hardware Team Power (HTPP) Not Warp9-systems's best Core i3 2100 submission
0.0 Points
Détails matériel
Détails Processeur
- Modèle: Intel Core i3 2100 'Sandy Bridge'
- Refroidissement: Single Stage Phase Change
- Cores: 3 387 MHz (+9.26%)
-
Détails mémoire
- Refroidissement: Air (Stock)
- Type: DDR3 SDRAM
- Fréquence: @ 2 330MHz
- Chronomètres CL8.0 8-8-24
Détails carte graphique
- Fréquence: MHz / MHz (Stock)
Détails carte mère
- Fabricant: GIGABYTE
- Modèle: GA-Z77X-UP7
- Chipset: Z77
-
Commentaires récents
Bullant a commenté son propre score:
Quick air test with some hypers, cold psc later
unityofsaints dit :
Epic results already!
yosarianilives dit :
What did your tertiary and rtl/iols look like? I had trouble getting mine to do what my psc would on sandy.
leeghoofd dit :
impressive!!
Bullant dit :
They do close to the same, I sometimes back off on some tertiary to push the memory MHz, then try and tighten if possible
This was a quick test so I didn't even look at the rtls, on PSC with cl6 around this MHz rtls are 32-31. Always use twcl6, Z77 trains rtls quite well, this board and bios I'm using doesn't give me the freedom to manually set adjust rtls-iols....I normally set everything "tertiarys and timings" in bios and not adjust with memtweakit within windows, tho when I run again I'll post the memtweakit pic of timings, if like to see rtls and tertiarys
thanks guys
Veuillez vous identifier ou enregister pour commenter