Submission details
KingCry`s Unigine Heaven - Basic score - Enthusiast league
5152.64 DX9 Marks with AMD Gaming Radeon R9 280 at 1250/1850MHz
Ranking position
n/a
Global 1x GPU rank:
3rd
Radeon R9 280 rank:
3rd out of 15
Points earned for overclocker league
-
Global Points
Not KingCry's best submission
-
Hardware Points
3rd using Radeon R9 280
7.0 Points
Points earned for team league
-
Global Team Power Points (GTPP) Not Team MLG's best submission
0.0 Points
-
Hardware Team Power Points (HTPP) 3rd in team using Radeon R9 280
4.4 Points
Hardware details
CPU details
- Model: Intel Core i7 4770K 'Haswell-DT'
- Cooling: Air (Custom)
- Cores: 4,400 MHz (+25.71%)
-
Memory details
- Product: Sniper
- Cooling: Air (Stock)
- Type: 16384MB DDR3 SDRAM
- Speed: @ 2,133MHz
- Timings: CL9 11-10-28 2T
VGA details
- Model: Radeon R9 280 (Tahiti) AMD
- Cooling: Air (Custom)
- Speed: 1,250 MHz (+32.98%) / 1,850 MHz (+48.00%)
Mainboard details
- Manufacturer: ASUS
- Model: Sabertooth Z87
- Cooling: Air (Stock)
- Chipset: Z87
-
Recent Comments
KingCry commented on his own score:
The VRMS were WAY to hot to touch on the back of the card. I.E. why the fan is on the side to pull some air over it from the front intake.
Aliover says:
Hi my friend
1850 MHz for the memory of is high.
How will pass this test?
What was the maximum temperature of the card?
What was the core voltage?
The highest stable speed of my card:
1210Mhz for Core-1650 MHz for memory
KingCry says:
Core voltage was left untouched, the max temp was 58C with the fans at 100% with 5C air being blown directly at the card then the Nocuta NF-P12 drawing air over the back of the card.
It was able to pass every benchmark I did on it with no artifacting, I did get a tiny bit when I hit 1600MHz but when I got past it
all artifacting was gone and the card was still stable.
Aliover says:
Thank you very much
My graphics voltage is lock.
My card default voltage of 1.25 v.
Can you increase the voltage?
KingCry says:
No problem
My card is voltage locked as well, it was looking like the only way to increase the voltage is to Edit the vBIOS for it otherwise its stuck at 1.25v
KGligorov says:
Hello , i have the same card . my stable clocks are 1200Mhz on Core and 1400Mhz on Memory with 20+% power !
Can i increase this or not ?
thanks !
Please log in or register to comment.