wytiwx says:

10 year and 3 months ago –

Crazy stuff comes again . Many mods for this points: VID mod, Vcore mod, Vccp(also Vnb) mod, Vmem mod, Mem spd mod, Vcca(Vpll) mod. Used CPU pot, NB pot, and Mem pot. Still FSB limited, higher than previous though. Another stuff in this: http://hwbot.org/submission/2511974, you may like it

MJ_Motamedi says:

10 year and 3 months ago –

Incredible

modman

Mat_Agnesi says:

10 year and 3 months ago –

I'm Just thinking: Who win between a Celeron 925 and Xeon L3014 at the same Frequency ??

Seems that Celeron is better.

A lot of mod here... more than my rig. I haven't performed vmem mod.

I think the limit is still the Chipset.. or not ?

I see 1.550 Volt Voltage, what is this? the CPU voltage ?

wytiwx says:

10 year and 3 months ago –

I'm Just thinking: Who win between a Celeron 925 and Xeon L3014 at the same Frequency ??

 

Seems that Celeron is better.

 

A lot of mod here... more than my rig. I haven't performed vmem mod.

I think the limit is still the Chipset.. or not ?

 

I see 1.550 Volt Voltage, what is this? the CPU voltage ?

In fact I did Socket BSEL mod too, FSB 800 to 1066.

Vccp mod is the key to get high FSB, Vcca mod and Vmem mod seems not so helpful, my Samsung Memory don't like high Voltage.

FSB limited more probably by CPU, I think. I have other CM 925, one can do FSB 383MHz Max on air and 405Mhz by LN2; one only do 336MHz on air. This nice chip can do FSB 392 Max on air

wytiwx says:

10 year and 3 months ago –

1.55V Vcore idle

amirhosein says:

10 year and 3 months ago –

holy crap ---------------nice wei ----------u'r my man

Mat_Agnesi says:

10 year and 3 months ago –

In fact I did Socket BSEL mod too, FSB 800 to 1066.

 

Vccp mod is the key to get high FSB, Vcca mod and Vmem mod seems not so helpful, my Samsung Memory don't like high Voltage.

 

FSB limited more probably by CPU, I think. I have other CM 925, one can do FSB 383MHz Max on air and 405Mhz by LN2; one only do 336MHz on air. This nice chip can do FSB 392 Max on air

I confirm, The north bridge voltage is the most important thing even in my rig.

So you are limited by the FSB Wall of the CPU ??

wytiwx says:

10 year and 3 months ago –

So you are limited by the FSB Wall of the CPU ??

I guess so, just like many E2140/E2160 and E5200 stop at 300~400 FSB, and different CM 925 do different Max FSB on my mobo

GRIFF says:

10 year and 3 months ago –

Very very good, but attempt for my score )))

wytiwx says:

10 year and 3 months ago –

Very very good, but attempt for my score )))

You can defeat me easily, my chip has tried its best

GRIFF says:

10 year and 3 months ago –

In any case, a great result and very hard modifications.