d3mox says:

11 year and 2 months ago –

I have 5200+ F3 and i can't raise voltage over 1.55v from ET6 or bios (f7b). help?

I.nfraR.ed says:

11 year and 2 months ago –

I have hardware mod. Board limits k8 to 1.55.

TaPaKaH says:

11 year and 2 months ago –

this might be a retarded question if Vmod is something like FB->GND, but do you mind posting a picture?

d3mox says:

11 year and 2 months ago –

I have hardware mod. Board limits k8 to 1.55.

 

Can u show pic?

I.nfraR.ed says:

11 year and 2 months ago –

sorry guys, but I'm not in Bulgaria right now. I have 2 mods on the board - vcore and nb mod. Will do vdimm mod when I get back home. Can show you pics next week.

d3mox says:

11 year and 2 months ago –

Okay, no problem

I.nfraR.ed says:

11 year and 2 months ago –

https://www.dropbox.com/sh/1ct53ethtbz3g63/RfpixGyvrk - link to photos

I've used 100kΩ VR for both mods. Nothing hard in terms of modding - just FB to GND.

First photo shows vcore mod, second one - vNB (black wire is GND, white on the IC is the FB and the other white is measurement point for NB. Last photo shows measurement point for vcore.

 

Be aware that I have blown one of the MOSFETs - it might not be related to the mod, but it also might be.

Got replacements, so I will fix the board soon. I think they overheated during the 5600+ session due to the fact I forgot to put a fan over the heatsink and it (the heatsink) was slightly bent to one of the sides.

Hate those plastic pushpins Gigabyte uses, but didn't replace them with bolts like I do on other boards.