Like this
Submission details
TM3K-`s SuperPi - 1M score
- Overclockers League
9sec 781ms with Intel Pentium E5200 (2.5Ghz) 
at 5707MHz
Ranking position
n/a
Global rank:
2nd
Pentium E5200 (2.5Ghz) rank:
2nd out of 307
Points earned
-
Global Points (UGP) Not TM3K-'s best submission.
0.0 Points
-
Hardware Points (UHP) 2nd using Pentium E5200 (2.5Ghz)
39.5 Points
-
Global Team Power Points (GTPP) Not 3d-info's best submission.
0.0 Points
-
Hardware Team Power Points (HTPP) 2 in team using Pentium E5200 (2.5Ghz)
81.3 Points
Media gallery
- Screenshots
-
Hardware details
CPU details
- Model: Intel Pentium E5200 (2.5Ghz) 'Wolfdale'
-
Cooling:
Liquid Nitrogen
- Temperature (°C): -145 (load) -145 (idle) 22 (ambient)
- Speed: 2,500 @ 5,707MHz
-
Memory details
- Product: Ballistix
- Type: 2048MB DDR2 SDRAM
- Clockspeed: @ 1,100MHz
- Timings: CL4.0 4-4-4
Recent Comments
I was prepared for the worst - cb ~ -110*C and reverse scaling with temperature over 5,5GHz which is typical for Wolfdale (2Mb). At least for those which I've benched earlier. But this CPU is a gold one. 1,2v vid 1.22v - 4GHz @ air 1,36v - 4.5GHz @ air 1,56v - 5,25GHz @ ss (wprime) 1,71v - max CPU Need v-pll less than 1,5v to pass over 5,4 ghz. Best vaule is 1,285V. But with oc-clocks boot only with default v-pll. Coldbug on -150*C, booting on 5ghz below -132*C. No other issues ...
No other issues with this set.
For PI i need mb with better ddr3 controler. Here 1600MHz ddr3 is maximum benchable frequency. With ddr2 I only have 4:5 FSB:DRAM multipiler (no 3:4) so performance is not very well.
nice job...
test wPrime 32m and 1024M on 5717 MHZ But SuperPi on 5707 MHZ ????
Memory was clocking on 1140mhz 4-4-4-4 and only 2,35v(no memory volt mod) They can do 1200 4-4-4-4 2,3v but not on this board. Wprime was done with stock speed ddr2 and wasn't limited by memory.
The benching was spent on wPrime, Pi score will be updated soon ;)
Please log in or register to comment.