提交成绩的细节
wytiwx的CPU Frequency成绩 - 极限联盟
8160.94 MHz 和 Intel Celeron D 352 在 8160.9MHz
排名位置
n/a
全球排名
n/a
Celeron D 352 排名:
Points earned for overclocker league
-
全球分数(UGP)
Not wytiwx's best submission
0.0 积分
-
硬件分数(UHP)
Not wytiwx's best Celeron D 352 submission
0.0 积分
Points earned for team league
-
全球战队能量分 (GTPP) Not TeamChina's best submission
0.0 积分
-
硬件战队能量分(HTPP) Not TeamChina's best Celeron D 352 submission
0.0 积分
硬件细节
CPU细节
- 型号: Intel Celeron D 352 'Cedar Mill-512'
- 散热: Liquid Nitrogen
- 批号
- Cores: 8,160.94 MHz (+155.03%)
-
内存细节
- 散热: Air (Stock)
- 类别 unknown
显卡细节
- 型号: GeForce 7600 GT AGP (DDR2) 512MB (G73) NVIDIA
- 散热: Air (Stock)
- 速度:: 560 MHz / 400 MHz ()
主板细节
- 厂商: GIGABYTE
- 型号: GA-EP35-DS4
- 散热: Air (Stock)
- 芯片组: P35
-
近期的评论
wytiwx 评价他自己的分数:
After testing 30+ Celerons, my 8GHz dream finally comes ture. oh yeath, XD. LN2 Pot: Koolance CPU-LN2-V2. mobo: GA-EP35-DS4( PCB REV: 2.1, BIOS Version: F5 ). EP35-DS4 can boot at -180C with Cedarmill. The VGA driver is not installed. Sorry for my poor English.
Massman 说:
NICE !!
Hyperhorn 说:
Great - especially with an EP35-DS4, which isn't a typical board to enter the Netburst 8 GHz club. Congratulations!
Christian Ney 说:
lol, using Koolance CPU LN2 Pot and GA-EP35-DS4. Must have been hardcore. I love that, great achievement well deserved
Blackbolt 说:
Nice Result,the Socket 775 are not Dead,very nice;)
NoMS 说:
[X] Unlock 8GHz Achievement in hardest mode.
Well done sir.
TaPaKaH 说:
only 20 chips, you're lucky! what's the batch and PCB of this one?
Hondacity 说:
unbelievable! thats a crazy board. i have bad cb on my boards.
Raul SDT 说:
Amazing one dude...P35 FTW !
l0ud_sil3nc3 说:
8 the hard way, great job!
Rady 说:
very good 775 is the best !
Mr. DB! 说:
VERY NICE! Cedar Mill IS BACK!!
xbeaTX 说:
bravo!
wytiwx 说:
Actually, I tried 35 Celeron chips. But I think I am still lucky.
The Batch of my CD 352 is 5647B641. The PCB code of my CD 352 is 3565216&3A2019
The thermal paste I used is almost the worst paste, only 5 RMB/20 gram(0.8 Dollar/20 gram). I think I can get higher freq. if I use better thermal paste.
The mobo is not in good condition, because there are only 5 phases for CPU Power supply
TaPaKaH 说:
there are so many "obstacles" in this score
- all 564xB China I had or heard of were amongst the poorest clockers
- P35 is not the best chipset for suicide validations, at least on ASUS boards I was getting random walls around 7.6-7.8 even with 8G pretested chips
- Gigabyte boards are not popular for CPU-Z validation
- Koolance pot with crap paste
do you have any non-LN2 scores with this chip?
K404 说:
+1 You really did make this as hard as possible for yourself!
Please can you test for us on air/water with 1.45v? Just mac CPU-Z validation. Don't worry about any load benches
Thanks bro!
wytiwx 说:
OK, I will test some air-cooling result with my EP35-DS4 and my Celerons.
Please wait to enjoy!
wytiwx 说:
I have added more details.
What the hell happen to my images?
It is not so clear.
oanvoanc 说:
your achievement is just amazing
whats the rev. of the mainboard?
thanks for sharing to the community.
wytiwx 说:
To OANVOANC:
mobo: GA-EP35-DS4 (PCB REV:2.1, BIOS Version:F5)
Christian Ney 说:
Send it to TaPaKaH, I see 9GHz coming
TaPaKaH 说:
to be honest, I never tried a Gigabyte for suicide validations, but I have a suspicion that on P5E3-Premium, using proper pot and proper paste, this CPU will surpass my 8308
Hondacity 说:
corrected
wytiwx 说:
To TAPAKAH:
I have no idea about the proper pot, is that the Dragon F1?
Now I use the Koolance pot because I have only one pot to use
To be honest too, EP35-DS4 is really not a good choice, especially only 4 PCB layers.
But this mobo has no CB/CBB for cedarmill suicide validations with any Vcore.I want to know if there was the same thing on P5E3-Premium, but I have no P5E3-Premium.
Masterchief79 说:
If you don't have these things... but such a good CPU... i see the sponsors running to be first at your door
Seriously, getting near to 8200 with this hardware is really nice and pretty humiliating for the rest of us It's kind of your duty now to beat TaPaKaH with the real shit
wytiwx 说:
I tried my celly 352 on an old P5E3-Premium, and This mobo have very bad CBB if I use the OV_CPU switch or Vcore >1.7, is this the OVP someting? Who can tell me how to deal with the CBB issue on P5E3-Premium? Thanks
TaPaKaH 说:
I had the exact same problem with my 8211MHz D0 chip - on P5E3prem with jumper at >1.7 and other boards it would CBB at -70, but with P5E3prem with jumper at <1.7 CBB moved to -160.
I'm afraid there's nothing you can do, sadly .. you'll have use your heatgun a lot, that's how I worked with the 8211 chip back in the day.
请登录或注册后才能评论