Aquamark3 HWBOT Edition wrapper available for download!

As you know from an earlier newspost, today we officially switch from Aquamark3 validation process. Untill today, the entire verification process relied on a single screenshot. With the new wrapper, all the benchmark information is stored in a single validation file similar to the one used for the Unigine Heaven benchmarks.

The wrapper application can be downloaded here: http://downloads.hwbot.org/downloads/benchmarks/HWBOT-aquamark3-1.0-Setup.exe

Later this week, we'll also publish a full installer which includes Aquamark3.

Have fun!


BelgiumMassman sagt:

First result:

 

[hwbot=2234491]submission[/hwbot]

Belgiumrichba5tard sagt:

Working very well on the windows 7 test pc. Good job!

Indiasumonpathak sagt:

nice:D

United StatesMr.Scott sagt:

Starting the wrapper in XP SP3, I get "please install the 64 bit patch of Aquamark". :confused:

Fix?

BelgiumMassman sagt:

You're running XP X64 ?

 

Here's a link to the Aquamark3 X64 patch: http://91.121.148.119/downloads/benchmarks/AquaMark3_Vista_X64-Patch.rar

Germanyder8auer sagt:

Very nice work!

 

Will test in the evening :)

Belgiumrichba5tard sagt:

Later this week, we'll also publish a full installer which includes Aquamark3.

 

Please include 64bit patch with installer. :)

BelgiumMassman sagt:

Yup, that's the plan :)

United StatesMr.Scott sagt:

You're running XP X64 ?

 

Here's a link to the Aquamark3 X64 patch: http://91.121.148.119/downloads/benchmarks/AquaMark3_Vista_X64-Patch.rar

I'm not running XP 64 bit. It's XP 32 bit SP3.

Greecestealth sagt:

 

I get the same error under win 7 X64. Does this patch works in win 7 also?

 

stealth

IranPUMAOC sagt:

same problem in 7 32bit :)

 

http://hwbot.org/forum/attachment.php?attachmentid=1085&stc=1&d=1324928953

BelgiumMassman sagt:

Please install that patch and try again ... :)

Greecestealth sagt:

Ok the patch works for me but i have another problem, right after the bench finish the screen gets black, i can't see a result and there is not a way to go to desktop. I have to reset the system.

 

Win 7 X64.

 

stealth

BelgiumMassman sagt:

Ok the patch works for me but i have another problem, right after the bench finish the screen gets black, i can't see a result and there is not a way to go to desktop. I have to reset the system.

 

Win 7 X64.

 

stealth

 

Does the same happen when you run just Aquamark (without wrapper) ?

United StatesMr.Scott sagt:

Works fine for me now. Thanks.:)

Greecestealth sagt:

Does the same happen when you run just Aquamark (without wrapper) ?

 

It seems the problem caused by the patch, uninstall and install aquamark again and running just fine without the wrapper.

 

Trying to upload an attachment...

 

stealth

S_A_V sagt:

Working Ok with my daily Win7 x86 no-SP1: http://hwbot.org/submission/2234615_

Will try it on bench XP/Win7/Win8 later.

For better compatibility with new hardware, replace ancient version of direcpll.dll (v4.10.01.53, released in 2004 year) in this archive with the latest one (v4.10.01.95, released in 2009) from EnTech Taiwan site: http://www.entechtaiwan.com/files/direcpll.dll

Belgiumrichba5tard sagt:

Working Ok with my daily Win7 x86 no-SP1: http://hwbot.org/submission/2234615_

Will try it on bench XP/Win7/Win8 later.

 

For better compatibility with new hardware, replace ancient version of direcpll.dll (v4.10.01.53, released in 2004 year) in this archive with the latest one (v4.10.01.95, released in 2009) from EnTech Taiwan site: http://www.entechtaiwan.com/files/direcpll.dll

 

Very good tip, thank you! I remember I had to do this too to get AQ3 working on a HD6850 + win 7

Greecestealth sagt:

That did the trick, changed the direcpll.dll with the latest version 4.10.01.95 and the bench works with the wrapper under win 7 X64.

 

Thanks S_A_V.:D

 

One more question... usually when we bench we are not connected to the net, if i want to save a file to submit later what exactly i need to do? As what file i need to save it?

 

Thanks a lot.

 

stealth

BelgiumMassman sagt:

You click "save result" and upload that file to hwbot :).

Italycnzdrn sagt:

I have no issue on vista 32 :)http://hwbot.org/submission/2234672_

Greecestealth sagt:

You click "save result" and upload that file to hwbot :).

 

Sorry but i don't get it... when i press "save result" a new window opens, at the bottom there are two fields i need to fill. The first one asks me for a "file name" and the second for "save as". What do i need to put on these two fields?

 

stealth

Belgiumrichba5tard sagt:

@stealth: weird, i don't get that. I think first field is filename and second field is file extension? The extension can be anything you like, I usually use ".hwbot" to remind me it's a file I can upload.

CanadaVinster sagt:

When clicking Save-Result, if the user didn't click the create Screenshot button, can you put up an error message? Without clicking that create screenshot button, and then saving the result gave me an error on the submission file upload.

IranPUMAOC sagt:

Please install that patch and try again ... :)

 

 

tanx.Works fine .

BelgiumMassman sagt:

When clicking Save-Result, if the user didn't click the create Screenshot button, can you put up an error message? Without clicking that create screenshot button, and then saving the result gave me an error on the submission file upload.

 

Good idea!

 

I'll add it to worklog.

United StatesMr.Scott sagt:

@stealth: weird, i don't get that. I think first field is filename and second field is file extension? The extension can be anything you like, I usually use ".hwbot" to remind me it's a file I can upload.

I get the same thing, but you're correct, it's just file name and extension. Not really an issue.;)

GreeceBoton sagt:

Still having problem running it. I'm installing am3, replace the 2 files from x64 patch, change the direcpll.dll.....and when trying to start

benchmark from the wrapper, i get the message "please apply x64 patch...."

Belgiumrichba5tard sagt:

And you have no problem launching AQ3 directly?

GreeceBoton sagt:

And you have no problem launching AQ3 directly?

 

Nope...running perfectly, also i get a result.

All other wrapper's options work fine. Running on win7 x64

GreeceBoton sagt:

Sorry for the double post...i ve tried the beta way, and running fine...whats going on? :P

United States[GF]Duke sagt:

Having serious issues with XP sp3. I'll just wait for the full install from here. Appling the patch didn't work out well for me.

GreeceBoton sagt:

I somehow solved my problem..:P

After installing both am3 and x64 patch, i ve put the wrapper into am3's program files folder and worked fine.

i ve tried on both xp and win 7. Try it...;)

United StatesMr.Scott sagt:

Duke;144769']Having serious issues with XP sp3. I'll just wait for the full install from here. Appling the patch didn't work out well for me.

Net framework 4 is required.;)

United StatesWitchdoctor. sagt:

will it run on XP 32 ?

United StatesMr.Scott sagt:

will it run on XP 32 ?

I'm running it now WD.;)

United StatesWitchdoctor. sagt:

cool it runs like shit on 7 for me

 

framework 4 ans sp3 is it then ?

United StatesMr.Scott sagt:

cool it runs like shit on 7 for me

 

framework 4 ans sp3 is it then ?

And the posted x64 patch. Directions are in the "read me".

And the direcpll.dll posted also.

United Stateszeneffect sagt:

works for me, w7 x64.

 

standard tweaks still work as they should.

BelgiumMassman sagt:

Uploading the full installer :)

BelgiumMassman sagt:

http://91.121.148.119/downloads/benchmarks/HWBOT-aquamark3-1.0-Setup.exe

BelgiumGamer sagt:

Kinda sucks when you want to upload a score when the system is powered down.

Then you notice you have upload a file.

Has taken me a while to figure it out :D

Germanyder8auer sagt:

Installed FW4.0 and 64 bit patch and it's running but when I click save result I get same like "stealth" with the "save as"

 

WinXP 32 SP3

Indiasumonpathak sagt:

error :(

2Pghq.jpg

Greecestealth sagt:

I manage to run it under Win 7 x64, Vista x86, XP SP2 and XP SP3 x86.

 

In Win 7 and Vista all i needed was the patch.

 

Under Win XP SP2 you need to install Windows Installer 3.1, then Windows Imaging Component and at last .Net framework 4.0 to make it run, under Win XP SP3 you need only .Net Framework 4.0

 

When i tried to run the bench under XP i got the error message "please apply x64 patch" although i run Win XP 32bit. Installed the patch but with the newer version of direcpll.dll, after that the aquamark ran fine.

 

Performance sucks under Win 7 and Vista, 20k less in Win 7 and 10k less in Vista.:P

 

stealth

Greecestealth sagt:

Installed FW4.0 and 64 bit patch and it's running but when I click save result I get same like "stealth" with the "save as"

 

WinXP 32 SP3

 

On the field "file name" type something like... "aquamark.hwbot" or what ever you like and click save. Then you can upload this file to hwbot when you submit the result. On the field "save as" it doesn't allow you to write anything.:)

 

stealth

Belgiummcq8 sagt:

sumonpathak:

You clicked twice on "start benchmark"?

 

stealth:

The 64-bit patch should always be applied regardless of the OS

The wrapper doesn't affect the bechmarkscore.

Germanyder8auer sagt:

On the field "file name" type something like... "aquamark.hwbot" or what ever you like and click save. Then you can upload this file to hwbot when you submit the result. On the field "save as" it doesn't allow you to write anything.:)

 

stealth

 

That's what I did but then I only had a 0 kB file which doesnt work if I want to upload it. Filename was result.hwbot

Will try again tomorrow.

Indiasumonpathak sagt:

sumonpathak:

You clicked twice on "start benchmark"?

 

 

nope...apparently my av was blocking a part of the hw3 wrapper....fixed it....

CanadaVinster sagt:

 

Now that I've installed this, I can't change my affinity settings in windows now. :( I could before with the first wrapper.

 

Vin

 

EDIT: Because I can't update the affinity setting I lose almost 80K on the bench... It gives me an access denied when I try. was this on purpose?

Germanyder8auer sagt:

Okay it works now for me :)

 

[hwbot=2235685]submission[/hwbot]

BelgiumMassman sagt:

Now that I've installed this, I can't change my affinity settings in windows now. :( I could before with the first wrapper.

 

Vin

 

EDIT: Because I can't update the affinity setting I lose almost 80K on the bench... It gives me an access denied when I try. was this on purpose?

 

Are you on win7 ? You can change affinity in XP, iirc.

Belgiummcq8 sagt:

nope...apparently my av was blocking a part of the hw3 wrapper....fixed it....

Which av are you using?

CanadaVinster sagt:

Are you on win7 ? You can change affinity in XP, iirc.

 

Win7-64bit SP1. it was fine before installing the all-in-one. then after I couldn't. I was getting an "Access is denied" error when I tried. I did a system restore to before the install and it's OK now.

 

I have only tried it on 1 system. my bench setup isn't prepped for any runs.

 

Vin

BelgiumMassman sagt:

Ok, good info. Looking into the issue.

NetherlandsViss sagt:

CPU score is displayed as GPU score in new GUI ?

CanadaVinster sagt:

CPU score is displayed as GPU score in new GUI ?

 

He's right...

 

Vin

Germanyder8auer sagt:

Icke&Er of my team reported another bug. He first used his nickname "Icke&Er" as windows username but then he was not able to run the wrapper. Using a different name like "bencher" it worked and the wrapper would run. Could the problem be the "&"?

United States[GF]Duke sagt:

I checked infinity and it seems that the wrapper is automatically enabeling all cores in xp32. I used to have to enable all core myself but it was already done. Weird though my GTX580 is running slow as snails. All other cards run fine.

 

Edit: I tried it on Vista 32 and i had to enable all cores manually and the GTX580 ran 100% better. So i am guessing that even though Task Manager is showing all cores enabled in WinXP32 they are not. How do i get all cores enabled now? loool THis is weird.

Netherlandsrsnubje sagt:

Is this utility now required for an official score? Or can I still use the old way till some date?

 

@Duke, for 500 series cards in xp you need a tweak in nvinspector. It involves dx9 compatability ;)

United States[GF]Duke sagt:

Getting this error now when submitting

BelgiumMassman sagt:

What if you try with Firefox or Chrome?

United States[GF]Duke sagt:

IDk i'll give that a try. But IE worked for me earlier this am when i benched a 8800gts in xp32.

 

http://www.hwbot.org/submission/2236483_gfduke_aquamark_geforce_8800_gts_320_mb_345337_marks

 

Edit: Google Chrome worked.

K404 sagt:

.net 4.0 makes my system (XP 32) CRAWL on startup.... ~ 30 seconds of thinking before a program will finish opening

 

Will try .net 3.5 and hope it's snappier.

United StatesHondacity sagt:

why does your sig makes you sound smarter? lol

Germanyder8auer sagt:

.net 4.0 makes my system (XP 32) CRAWL on startup.... ~ 30 seconds of thinking before a program will finish opening

 

Will try .net 3.5 and hope it's snappier.

 

Hey Kenny :)

I had the same problem like you but after like 20 startups the problem was gone out of nowhere :) Hope same goes for you!

K404 sagt:

why does your sig makes you sound smarter? lol

 

It's the HondaCity effect.... EVERYTHING sounds smarter :D

 

 

Hey Kenny :)

I had the same problem like you but after like 20 startups the problem was gone out of nowhere :) Hope same goes for you!

 

 

Heh.... I do not have 20 startups of patience :D I have a fresh system with .net 3.5. I will see how it behaves before I throw it out the window

TaPaKaH sagt:

regarding slow bootup - I think it's due to some framework scheduler sitting in the background, you can disable it if you have the patience to google

United StatesHondacity sagt:

f8c8943b.png

TaPaKaH sagt:

yes, we will all be having problems with antivirus on our benching OS

K404 sagt:

6a00d8341c387d53ef0148c84decb8970c-320wi

United StatesHondacity sagt:

hahahhahahhahahha

United StatesHondacity sagt:

1b71c080.png

Australiagazza30 sagt:

Have been trying to get this to work for the last day and no luck probably just me lol. Installs fine click on startbenchmark - benchmark runs gives me a score - what exactly do i do next i've tried alt tabbing out back to desktop but when i do the wrapper is greyed out and does not allow me to take a screenshot. down the bottom of the wrapper it says running benchmark even when it has finished as has given me a score.

 

Ok worked it out you have to close the aquamark benchmark down then the score appears in the wrapper. I hope a readme is included in the download but other than that looks good

Germanyder8auer sagt:

.net 4.0 makes my system (XP 32) CRAWL on startup.... ~ 30 seconds of thinking before a program will finish opening

 

Will try .net 3.5 and hope it's snappier.

 

Found the solution for this problem :)

 

When .NET redistributable is installed, it compiles the high priority assemblies in 5 to 10 minutes and then waits until your computer is idle to process the low priority assemblies. The following method forces all of the remaining items to be compiled with a command called NGEN.exe. Follow these steps:

 

1) Run cmd.exe from Start > Run

 

2) Type cd\

 

3) Type cd Windows\Microsoft.NET\Framework\v2.0.50727

 

4) Type NGEN executequeueditems and press Enter

 

5) It will take about 1-10minutes depending upon system speed. After the process is complete, the following prompt will appear in the command prompt

 

C:\Windows\Microsoft.NET\Framework\v2.0.50727>

 

6) Type exit to close the command prompt.

After performing these steps, your computer will boot up at usual speed.

CanadaVinster sagt:

^So you only have to do this once? and then that's it?

 

Thanks for finding this

 

Vin

Germanyder8auer sagt:

Yep. After installing the Netframework 4.0 the System slows down at the startup to like 2mins boot-time. After you did this once the problem is gone. Tried on two different systems :)

K404 sagt:

Thanks bro!!! :D Appreciate it

BelgiumMassman sagt:

Moved into a better fitting subforum

ArgentinaSweet sagt:

Found the solution for this problem :)

 

When .NET redistributable is installed, it compiles the high priority assemblies in 5 to 10 minutes and then waits until your computer is idle to process the low priority assemblies. The following method forces all of the remaining items to be compiled with a command called NGEN.exe. Follow these steps:

 

1) Run cmd.exe from Start > Run

 

2) Type cd\

 

3) Type cd Windows\Microsoft.NET\Framework\v2.0.50727

 

4) Type NGEN executequeueditems and press Enter

 

5) It will take about 1-10minutes depending upon system speed. After the process is complete, the following prompt will appear in the command prompt

 

C:\Windows\Microsoft.NET\Framework\v2.0.50727>

 

6) Type exit to close the command prompt.

After performing these steps, your computer will boot up at usual speed.

 

Ohhh thanks so much !! i have this problem in XP :)

BelgiumMassman sagt:

 

So ... you reported the app as virus to Norton?

United StatesHondacity sagt:

it just popped up, just sharing, sharing is caring lol

K404 sagt:

Anyone who has Norton on a bench rig isn't getting any decent scores anyway.

Belgiumleeghoofd sagt:

Mega Facepalm

AustriaTurrican sagt:

Anyone who has Norton on a bench rig isn't getting any decent scores anyway.
fully ack. :D

United StatesHondacity sagt:

norton internet security suite has a tweaker/gaming setting. :P

KazakhstanDEEP_1984 sagt:

new aqua with gui , not working . system in not responding when test end. and whis is not a BSOD. only BlackScreen

ci 5 2500k -default

HD4890 default

winXP SP3

cat 10.2

United States[GF]Duke sagt:

Seriously Honda??? Who uses a Antivirus on their benching rig. Huge Facepalm. I did however get a warning from windows security when i downloaded it with my daily rig for storage purposes.

United StatesHondacity sagt:

lol

 

its my forum/spam server. come on I "almost" beat your 2d efficiency :D

United StatesWitchdoctor. sagt:

AM not working 32 bit XP SP3

 

Any fix out there? runs bench just does not take screen and submit

 

no score reading either

BelgiumMassman sagt:

So,

 

- open launcher

- start benchmark

- benchmark finishes

- close aquamark

- no score reading?

 

You have to manually close the benchmark.

United StatesWitchdoctor. sagt:

Yes that is it

 

manually turn off

 

HWBOT AM screen has pail white hue & no score is calculated, I am guessing that is why it is not working as their is no score to activate the GPUZ and CPUZ option and so on with make scereen shot and submit ???

 

does the 64dll need replaced is the only thing I can think of ???

 

will have to try that

CroatiaE-mil sagt:

Ahoj!

 

Install and work fine, but when I run test with hwbam3.exe, I get a result for around 40,000 pts less than when I run AQM3 alone.

Why?

 

2600K

8800 GT

WIN XP SP3

United StatesJohnksss sagt:

Yes, something is different about this version. I scores 10,000 points less than the standard version.

GreeceBoton sagt:

we have problem running the wrapper on a tiny win7 x64 installation without network. it is asked to be installed .netframework 4.0 . It's appear: " Installation did not succed. Class not registered" . Any solution?

United StatesHondacity sagt:

install 3.5 first then 4.0

GreeceBoton sagt:

same problem....

United StatesHondacity sagt:

tiny win7 has missing files..use full version

BelgiumGamer sagt:

CLI

Runtime error 7

Out of memory error.

 

XP SP2.

Australiahikkoo sagt:

any chance add option to "CLICK TO OPEN" ,to reset path so can select another version cpuz or gpuz

@ moment to open another vers is drag cpuz or gpuz to diff location so can change path with AqMk3 Hwbot edition

 

First wrapper 1.0 installation worked good.

Then uninstalled wrapper + uninstall .Net4 Framework on XPpro SP3.

After Reinstall wrapper > notice .Net4 not get installed so 'HWBOT aqmk shortcut' not work > get Error the application failed to initialize properly (0x0000135).

So uninstall wrapper again

Then Find in C:\WINDOWS\Microsoft.NET which still has folders related to .Net4 but most files are missing

Drag Microsoft.NET Folder to desktop an run again wrapper an now it installs .Net4 framework an works!:)

 

wanted to try if get better scores without .Net4 using Original Aqmk3, sofar similar scores

GreeceTONY GAL sagt:

the score always is very bad .windows 7 x64........

many people say the same think...

what happened?

BrazilRbuass sagt:

No wrapper sove my problem

Out of memory (error 7)

 

I got almost 46000 and no validation... only the screen

(HD 7970 and 2600K @5980 mhz)

HD 7970 stock is better than overclocked to AM3... or you need to be Andre Yang to tell us the secret

GermanySoF sagt:

Yes, something is different about this version. I scores 10,000 points less than the standard version.

 

this is caused by the fact that you are not able to use the non-patched exe with ~ 4027kb - it will tell you to install the 64bit fix exe (~3972 kb).

 

imo that MUST be solved as it is impossible to match the old scores in many many cases.

K404 sagt:

I am still in the midset of "AM3 only needs a screenshot"

 

 

SO.... I opened the HWB wrapper, ran AM3, got score.... opened CPU-Z/ GPU-Z, lined everything up...... took a screenshot....... then closed AM3

 

 

fuuuuuuuuu.jpg

Russian Federationsheffline_85 sagt:

why can not I put the result of akuamark? in the rules was not a word that we need a Validation file. Why do I have to wonder how to do it? even after I saved the file to put the result I can not, what dick? please answer the administration, I'm furious!

http://s2.ipicture.ru/uploads/20120227/rmlg53zu.png

Russian Federationsheffline_85 sagt:

he figured out

NABE sagt:

run-time error 6

 

many problems....tired ..................return to before.

I fight with benchmark before running the benchmark why?

United StatesI.M.O.G. sagt:

Put another one in the "too dumb to figure out how to run aquamark" column. Can't get .net4 to install on XP.

AustriaTurrican sagt:

Put another one in the "too dumb to figure out how to run aquamark" column. Can't get .net4 to install on XP.

 

you have to use win xp with sp2 at least. with sp1 or no sp at all it doesn't work. ;)

Eeky NoX sagt:

I don't have internet on my rigs... and even at home. Than no fw3.5 ---> I bypass Aquamark atmo :( thx

United StatesI.M.O.G. sagt:

you have to use win xp with sp2 at least. with sp1 or no sp at all it doesn't work. ;)

 

Thanks, got it running after that.

GreeceBoton sagt:

Sorry for the bump....but i have a serious problem...i got 50K less than running the am3.exe..

 

Any ideas?

South AfricaVivi sagt:

geobot go rename your aquamark to "aqua" or anything OTHER than aquamark3.exe.

 

OR if you are on newer nvidia card / drivers you must go do the D3D thing in nvidia inspector

GreeceBoton sagt:

geobot go rename your aquamark to "aqua" or anything OTHER than aquamark3.exe.

 

OR if you are on newer nvidia card / drivers you must go do the D3D thing in nvidia inspector

 

Ive already done that...;)

 

Something seems to stuck the benchmark when running the wrapper. If i run like old days

the renamed am3.exe it "listens" to clocks changes etc.

When running the wrapper with also renamed am3.exe, i get the same score always.

 

GTX260 192sp, 396K like old days, 344K with wrapper. Ive tried different drivers with the same

bevaviour

Eeky NoX sagt:

I repeat but it was easier back in the days :(

No more scores from me since this wrapper arrival!

 

...nostaglia -.-

Belgiumleeghoofd sagt:

Eeky you Pussy !

GermanySoF sagt:

Ive already done that...;)

 

Something seems to stuck the benchmark when running the wrapper. If i run like old days

the renamed am3.exe it "listens" to clocks changes etc.

When running the wrapper with also renamed am3.exe, i get the same score always.

 

GTX260 192sp, 396K like old days, 344K with wrapper. Ive tried different drivers with the same

bevaviour

 

344k vs. 396k does sound a lot like no 64 bit exe vs. wrapper required exe with that patch. does have a HUGE impact on scores not to allow the non-patched old executable...

Belgiumleeghoofd sagt:

maybe he runs it on one core ?

GreeceBoton sagt:

344k vs. 396k does sound a lot like no 64 bit exe vs. wrapper required exe with that patch. does have a HUGE impact on scores not to allow the non-patched old executable...

 

I used the 107MB file that installs both am3 and wrapper. renamed the am3.exe and

run the benchmark from the wrapper.

 

Maybe is windows issue. At win7 x64 with ati cards have no problem

GermanySoF sagt:

Found the solution for this problem :)

 

Saved my day Roman! Thanks man!

 

I reinstalled my XP some days ago and was wondering about the booting-issues.

 

Almost went nuts, never had issues on my old installations before.

ngen -update works just fine.

Russian FederationTerraRaptor sagt:

A have a problem when starting aquamark from wrapper - it gives "unknow param xp\aquamark3\aquamark.exe" error. When I press ok button wrapper quits.

XP SP3 with .net 2.0, 3.5 and 4.0 installed.

Puerto RicoMrPaco sagt:

Even after downloading & installing the latest, I keep getting the following error.

Installs n runs the bench just fine but after submitting the run is where the issue is.

 

aquaerror.jpg

United StatesI.M.O.G. sagt:

Mr. Paco, that issue is probably similar to this one that was just fixed:

http://hwbot.org/forum/showthread.php?t=51891

Puerto RicoMrPaco sagt:

Mr. Paco, that issue is probably similar to this one that was just fixed:

http://hwbot.org/forum/showthread.php?t=51891

 

The issue you linked to was about WPrime.

I dont know if they similar, might be. Mine is that the bot engine dosnt see my aqua mark as the latest 0.0.1 :(

 

Just tried it again with a fresh os install & a new download of the wrapper n app....still no good :confused:

United StatesI.M.O.G. sagt:

Yea, it was wprime, the problem I linked is also related to changes with result submissions. I think the submission pages were being tweaked and there were some related/unexpected problems.

Puerto RicoMrPaco sagt:

Ah Ok Got-cha, Thanx.

Wonder if any one else has had this issue too with Aqua M3?

Brazilcodekarllo sagt:

same here with aquamark...got latest version too.

 

 

th_762701653_aquamark_bug_122_389lo.jpg

sagt:

The same problem here.

 

I am waiting to fix it.;)

Denmarkzzolio sagt:

use windows 7 patch ind XP works here

Japanm@bo sagt:

mine.

 

file upload is ok.

 

12944780.th.jpg

 

12944780.jpg[/img]

 

but submit is fail.

 

57677473.jpg

Belgiumrichba5tard sagt:

Fixed, thanks for reporting.

K404 sagt:

This might come across as disrespectful to the people who made the original wrapper.

 

Tonight, I ran AM3 without the wrapper, once... and got a score of 462K.

 

Using the wrapper, I had two scores < 400K, 9 crashes and eventually, a score of 420K

 

 

How did this pile of bunny pass internal testing and how could it be claimed to "not change anything?"

GENiEBEN sagt:

How did this pile of bunny pass internal testing and how could it be claimed to "not change anything?"

 

I see you tested it 10times on the old one and didn't report the score with the new one lol.

Belgiumleeghoofd sagt:

Is there any update if this one get's officialised ?

GENiEBEN sagt:

Is there any update if this one get's officialised ?

 

If: yes

When: as soon as I fix the file format and it gets implemented.

K404 sagt:

Launch with Rev 5? :)

United Statesracingken sagt:

Is there a link to all the patches we need for AquaMark3, so that it works when we submit a score? I have not yet come accross them, or a list as to what all we need to download for it to work with 7 64bit.

 

Any help with this is appreciated!

 

Ken

K404 sagt:

PM me your email address bro, i'll send over the files :)

United Statesracingken sagt:

Thanks Bud, it didn't work for me as it always tells me I need administrator rights, and I am not sure how to change that. I should have all rights as I built this darn thing from scratch.

 

Ken

K404 sagt:

Weird, i've never had any problems like that. I'm sure someone else will have more knowledge of admin rights Vs stripped OS and can help you though :D

GENiEBEN sagt:

Thanks Bud, it didn't work for me as it always tells me I need administrator rights, and I am not sure how to change that. I should have all rights as I built this darn thing from scratch.

 

Ken

 

Admin or not must 0 UAC so you have C:\ rights http://www.howtogeek.com/howto/windows-vista/disable-user-account-control-uac-the-easy-way-on-windows-vista/

Bitte einloggen oder register to comment.