HWBOT Catzilla 1440P Benchmark Validation Regulations

  • Benchmark Rules
  • 1

HWBOT Catzilla 1440P Benchmark Validation Regulations

Allowed benchmark versions
  • No version restriction
  • It is highly recommended to use the latest version
Allowed operating systems
Default benchmark settings1440p
ScoreThe score is obtained after running the 1440p preset
Allowed optimisations
  • LOD
  • Change tessellation level in graphics driver
  • Ramcaching and ramdisk
Disallowed tweaks/cheats
  • Altering benchmark files or the rendering
  • Any software or human interaction altering the perceived speed of the benchmark program, tricking it to believe it ran faster
  • Lucid Virtu MVP
  • Mipmap
  • Change benchmark settings
Verification screenshot requirements
Verification linkVerification link required for Global Top 20
Example screenshot

Red: Mandatory Green: Optional

Additional notesThis page contains the benchmark result regulation specifications for Catzilla 1440p. The rules as described in our General Rules section are still applicable even if they are not specifically mentioned on this page.

It is your responsibility, and the responsibility of your team captain(s) that these rules are followed properly. Your submission may be blocked by HWBOT moderators without notice if your submission is in violation of one of these rules. Multiple infractions may lead to a warning, and eventually an account ban.

  • Feb 15, 2017: link
  • March 16, 2015: add submission tutorial
  • February 17, 2014: update verification rules (after fix data file submission)
  • February 3, 2014: update verification rules (more info)
  • June 12, 2013: Initial draw
Submission tutorial

Christian Ney says:

Reserved for tweaks and tips


- Open 3DMark11 after opening Catzilla then run the benchmark.



H2o vs. Ln2 says:

MORE 3D 4LESS... Go back to X99 platform, spend 50% less money with 6950X for 20%+ beater results that 7980XE Step1. Need fresh W7 SP1 with all updates, install Catzilla 1.2, 1.3 and 4K directory and run alternative. Rig System (nothing special here, U can do beater… I’m just an artist); 1. Good case all inlet fans ventilation to prevent moisture 2. Dual chiller or more, close to/or under 9 Celsius inlet requaier. 3. LGA X99 Extreme MB (R5E, R5E10) 4. Extreme processor (6950X) 5. DDR4 [Ripjaws V] F4-3200C14Q2-64GVK Bios Setup; 1. XMP 2. CPU Strap 100 3. BCLK Freg. 102.9 or closer (try also 102.7 or 102.6 if fail) 4. CPU Core Ratio 37 or 36 5. BCLK Freq. 100:133 6. DRAM Freq. 3400 or closer 7. DRAM Timing Cl12.12.12.12 1T 8. Extreme Tweaked (all at maximum/extreme) 9. Extreme Tweaked. Long Duration 4095, Package Power Time 127, Short Duration 4095 10. CPU core Voltage 1.45 or lower 11. DDRM Voltage 1.76V under H2o cooling 1.86+V air cooling. 12. Hyper-Threading Enable. You can try disable only for lower resolution as 720p for same GTX. Step2 Boot up on W7U SP1 and apply More 3D 4Less tweak; 1. Change BCLK to 97.3 or closer (may need two steps for this 98.0 first, then 97.5). Any crash?!! Welcome to OC, keep trying until ╭∩╮ that mb. 2. +After lower the BCLK you will be able to increase the CPU, GPU

Please log in or register to comment.