In the second episode of our Motherboard Memory Lane series we hone in on the Intel P35 Chipset, the successor to the Intel P965 chipset that we covered last week. The plan as always is to take a look at the P35 chipset and its Southbridge companion, the ICH9 in a little detail, outlining the new features that it brought to market, the most popular motherboards of that era on HWBOT, and of course the benchmark records that we can attribute to that era. With no further ado, let’s crack on.
Codenamed Bearlake, the P35 Chipset was launched in the 2nd Quarter of 2007, replacing the popular and long standing Intel P965 chipset. It was launched to target the enthusiast segment alongside mainstream and entry-level G35 and G33 offerings (which also featured integrated Chipset graphics capabilities). The P35 arguably boasted one key feature that made it standout from previous offerings from Intel; a higher 1333MHz Front Side Bus and support for Dual-channel DDR2 1066/800/667. It also support DDR3 at memory at similar speeds (and was the first commercial Chipset to do so) although at this point in history DDR3 kits remained around double the price of equivalent DDR2 kits while simultaneously bringing virtually no performance gains thanks to predominantly higher latencies. The fact that the vast majority of popular P35- based motherboards supported only DDR2 is clear evidence of this.
Welcome to the Motherboard Memory Lane series, a series of articles that examines PC motherboards and related platforms from an historical perspective. The idea is to explore the boards, the platforms and features from the perspective of HWBOT and overclocking. We’ll also revisit the specific motherboard from each era that proved to be the most popular according to our database, while revisiting the overclockers who used them and the world records that were attributed to them at that time. Let’s move on to our first point in motherboard history, the Intel P965 platform.
Introduced in mid-2006, the Intel P965 replaced the P945PE chipset. In terms of design it was typical of the days when a chipset truly was a set of Northbridge and Southbridge chips. The P965 was a Northbridge chip paired with a ICH8R Southbridge, supporting a range of processors that used the LGA775 socket. The P965 chipset enjoyed a fairly long shelf life that spanned several processor architectures and model names; Intel Celeron, Pentium 4, Pentium D, Pentium Extreme, Core 2 Duo and Core 2 Extreme CPUs. In terms of memory support the Intel P965 used 240 pin DDR2 at standard speeds of DDR-533/667/800, in most consumer boards limited to a maximum capacity of 8GB.
HWBOT Invites Brazilian Ambient and Extreme Overclockers to Learn and Compete in the Latin American Stop of the HWBOT World Tour 2017
HWBOT today officially announces the second stop of the HWBOT World Tour 2017. In Sao Paulo, Brazil, during the first week of February, HWBOT hosts an overclocking workshop and the Latin American qualifier of the Overclocking World Championship at Campus Party. Each stop of the tour includes an Overclocking World Championship Qualifier contest where the winner gets to secure a place in the World Championship 2017 Final at the end of the year. The Qualifier contest winner will walk away with a trophy and a ticket to the Final.
"We look forward to returning to Sao Paulo for the Latin American leg of the World Tour 2017, a city that brings back fond memories," commented Pieter-Jan Plaisier, Director at HWBOT. "Campus Party brings together the perfect audience for overclocking with students, technology enthusiasts and gamers all in one location. The Brazilian passion is energizing and people are eager to find out more about Overclocking."
Welcome to SkatterBencher #6. In this episode we are focusing our attentions on the latest Kaby Lake architecture processors from Intel, specifically the Core i7 7700K. In this guide we want to show you how to Overclock an i7 7700K from its default clock frequency of 4.5GHz, to 5GHz and beyond. We're also going to show you in our typical quick-and-easy style, how to also push the DDR4 memory frequency, the integrated graphics, plus a nice trick that will push the CPU even further while only using an all-in-one cooler. Of course we'll also examine just how much performance can be gained by running some benchmarks.
The quest to find out which country has the best overclockers in the world in 2016 is almost upon us. The HWBOT Country Cup 2016 kicks off in just a matter of days, pitting country against country across six gruelling stages that promise to be the truest test of overclocking pedigree. The contest starts on November 1st and closes the day before Christmas eve with prizes, as well as lots of kudos lined up for the winners.
In previous years we’ve seen wins from Romania (2x), Poland and Greece, but in 2013, 2014 and 2015 the Australians were the top global force to be reckoned with, producing three displays of such dominance that they barely dropped a point. Will they be in the ascendancy once again in 2016, or are their natives of other countries willing to put their OC creedance on the line and go for the win? Could Germany finally flex their OC teamwork muscles, or perhaps the US will find a winning team ethic. And let’s not underestimate the Belgians after their recent Team Cup exploits. An intriguing battle lies ahead, that is the only certainty.
Abit was arguably one of a host of long lost motherboard vendors that most enthusiasts recall with a certain degree of fondness. Indeed most PC enthusiasts who were active prior to the company’s demise will remember Abit as one of the first motherboard companies to actively develop and promote specific Overclocking features. The good news today is that HWBOT Community Leader Christian Ney has uploaded a back up the original Abit website to his own domain, providing access to many of the resources that were available to the community back in the day.
According to Christian in a forum post earlier today:
“Before Abit shut down, Turrican and I made a backup of their FTP. I thought I lost it but when checking some external hard drives the other day I found the backup. I did not upload the whole backup (it is quite big). I only uploaded the BIOS, Beta, FlashMenu, Manuals and Utilities directories to my website. If you however need driver(s) or product picture(s), feel free to request them. Now if someone has a backup of DFI's… :D”
The inclusion of BIOS images will be a very helpful resource to many who still opt for an Abit board when revisiting older processor platforms, such as the Socket A / Athlon XP era which proved to be an historical point where Abit were in many respects ahead of the competition when it comes to providing innovative features that Overclockers could take advantage of.
Here’s some news fresh from the HWBOT X website that covers an Overclocking Gathering that was held at the HwBox headquarters in Piraeus, Greece just a week or so ago. By the sounds of it, the event managed to get virtually all of the country’s OC talent, past and present, in one space. The meet up garnered quite a few Hardware First Place scores, mostly combining Kaby Lake with several classic Radeon HD 5XXX and 4XXX cards:
“In attendance were many of Greece’s most respected Oveclockers, including a few faces that may not be active benchers today, harking back to the origins of Greek Overclocking. The attendee list included Phil, mortisboy, Demac, Firekiller, kintaro, varrachio, $@39@, Gorillakos, MetallicGR, Astalavista, AMDnord, storm1978, greekphantom and others – pretty much a who’s who list of the most important Overclockers in the country.”
“As key event sponsors GIGABYTE provided a great introduction to the new Z270 platform from Intel, giving all Greek masters at the event a chance to get to know the GIGABYTE Z270X-Gaming-SOC motherboard. Coupled with the latest Intel Core i7 77700L processors, the was plenty of LN2 on hand for the gathering.”
“After a fun weekend of Extreme Overclocking, several attendees managed to submit scores that would gain points as Hardware First Place rankings. These included scores and submissions from OGS, mortisboy, Greek Phantom and Sofos1990. Using a mix of Radeon HD 5970, Radeon HD 5870, Radeon HD 5770 cards, plus Radeon HD 4870 and R9 270X cards the gathering turned out to be a veritable points harvest for the HwBox Hellas Team, of which all attendees are a member.”
Renowned iF International Design Forum Selects the BC1 Open Benchtable for Computer Product Design Award 2017.
[Press Release] February 21, 2017 - STREACOM and HWBOT, an organization regulating international overclocking competitions and rankings, is proud to announce selection of the BC1 Open Benchtable as winner of the prestigious iF DESIGN AWARD. The BC1 Open Benchtable was the winning product in the category of Computer Product, underlining the unique design of the BC1 which offers a lightweight, portable, toolless and fully integrated benchtable for enthusiasts and professionals.
“After more than a year of research and design, followed by months of work with partners Streacom to bring the product to market, it’s an honor to receive industry recognition from a respected group like the iF International Design Forum,” commented Timothée Pineau, VP of OverClocking-TV.
“This award from iF Design underlines the value of leveraging the unique knowledge base and expertise of the PC enthusiast community at HWBOT,” commented Pieter-Jan Plaisier, Director at HWBOT. “The innovative design of the Open Benchtable owes a great deal to the input and feedback of enthusiastic HWBOT members from around the world.”
“It is truly an honor to receive this prestigious award for the BC1, which stands as a testament to the unique and innovative design that has redefined the benchtable market,” commented Shimon Simon, Head of Design and Manufacturing at Streacom. “The award further validates our reputation as a company that pushes the boundaries of form, function, quality and value.”
The BC1 Open Benchtable and its uniquely portable and integrated design clearly made a positive impression on the 58-member iF DESIGN Forum jury which was made up of independent experts from all over the world. The competition was intense with over 5,500 entries submitted from 59 countries - all hopeful of receiving the iF DESIGN seal of approval.
Just a few days ago we came to the conclusion of the second round of the Old School is Best School contest on OC-ESPORTS. The contest ran from January 15th to February 15th and attracted the attention of 28 teams of Overclockers. At the end of a month spend toiling with AMD’s classic socket 939 era processors Nvidia’s GeForce 7 series, we find Greek overclockers HwBox Hellas O/C Team in total control of the Round with TechSweden.org in runner-up spot and Round 1 winners XtremeOverdrive OC Team Italy in third place. Let’s take a look at the Round 2 contest in a little more detail.
Stage 1: Cinebench R11.5
In Stage 1 we find the Greek are already making a strong claim with an outright win on the Cinebench R11.5 benchmark, taking top spot with a score of 0.93 points per core. The win arrives in part with the decision to use a single-core CPU, a wise choice seeing as all scores are in fact divided by the number of cores present on the CPU. The HwBox Hellas O/C Team earned 25 points and top spot thanks to good work from Greek Overclocker Stelaras who pushed an AMD Athlon 64 FX-57 (San Diego) to 3,655MHz, a very tasty +30.54% beyond stock. In terms of motherboard, he used a DFI LANParty UT NF4 SLI-DR Expert.
In second place we find Japanese master Kotori, who managed to score 0.91 points on behalf of the Warp9-systems team. This was done with an LN2 cooled single-core AMD Athlon 64 4000+ (San Diego) clocked at 3,578MHz (+49.08%) using a DFI LANParty UT nF4 Ultra-D motherboard. Third place goes to Dead Things and his team at Hardware Canucks, managing a score of 0.91 points using an Athlon 64 FX-57 (San Diego) pushed to 3,535MHz (+26.27%) and the same DFI board as Kotari.
Just like every month we have a look at the SuperPI 32M low-clock challenge threads in our forum and make a list of the most efficient overclocks for various CPU architectures. Compared to last month, we have new scores to share. In the Intel category, Luumi (Finland) is currently leading with his Skylake submission of 5 min 52.750 seconds. In the Kaby Lake category Coolhandluke41 (United States) improved the best time to 5 min 42.890 seconds. In the AMD camp nothing has changed because, well, aren't we all waiting waiting for Ryzen?
If you are the kind of person who is prone to burning the midnight oil pouring over Intel processor datasheets, then the latest video from Buildzoid may well be the best thing you’ve seen all week. Datasheets for complex components such as processors are not always so easy to interpret, containing lots of data and numbers that may not always make complete sense for anyone except an Intel engineer. The latest video from Buildzoid sets out to debunk and demystify any potential misinterpretation; starting with the notion that 1.52V is NOT a safe maximum voltage for a modern Intel CPU:
Looking at a processor datasheet from Intel can and perhaps should be quite a challenge for the uninitiated. Buildzoid notes that there are plenty of data points that can very easily be misunderstood. He makes the point that in fact many enthusiasts and overclockers make the mistake of thinking that the figures used are literally guidelines for enthusiasts. For example, in the ‘Operating Voltage’ > ‘Voltage Range for Processor Active Operating Mode’ section we find a range of between 0.55V and 1.52V. This range has actually been consistent from Intel on its datasheets for several generations and in truth is determined to help motherboard vendors design their VRMs. It is not a guideline to inform Overclockers. Buildzoid also makes the point that in fact, when seeking advice regarding upper voltage limits, it’s good remember that it isn’t voltage that kills CPUs, it’s current. He also takes time to look at many of the side notes contained on the Intel datasheets to further clarify what can and cannot be gleaned one of these datasheets from an Oveclocking perspective. It’s a pretty informative tutorial regarding how datasheets from companies from Intel can be misinterpreted and how Overclockers should read between the lines at times.
KingpinCooling have just added a new product to their range of Extreme Cooling products, launching the KPC INFERNO Hot Plate Kit. It might seem somewhat counter intuitive (or at least it did to me initially) to have a product that actually prevents parts of your rig reach from getting really cold. However that is exactly what the KPC Inferno is all about. The Inferno is essentially an automatic, sensor driven heat plate that is designed to keep specific areas of the motherboard PCB from becoming too cold during prolonged sub zero benching sessions.
To coincide with the launch of the KPC Inferno, Vince has also written an installation guide which also explains the motives behind the creation of the product and the specific issues that it can address:
“The new heater plate kit was designed to keep the surrounding PCB socket area as well as dimm slot area and cpu vrm from excess freezing. When using most forms of sub zero cooling, it can actually cause bad performance/signaling, cold related problems on the motherboard PCB itself, as well as water and ice everywhere which can lead to shorting and eventual hardware failure. Using the plate regularly can add hours and hours to bench sessions while greatly extending the life of motherboards when using extreme cooling. These kits are designed as a bolt on upgrade for ALL KPC CPU containers, past, present, AND future.”
“KPC Inferno plate does everything automatically and efficiently as possible, all user needs to do is plug into 6 pin PCI-E connector on system PSU and that's it! From phase change cooling(-40c to -60c), to Dry Ice(-55c to -70c), to Cascade cooling(-80c to -120c), to full out LN2 cooling and beyond(-193c to ***), the inferno can calibrate and tune itself according to negative thermal loading on the PCB.”
[Press Release] Taipei, Taiwan, February 17th, 2017 – GIGABYTE TECHNOLOGY Co. Ltd., a leading manufacturer of motherboards and graphics cards, is excited to announce four overclocking competitions, starting from the beginning of March running to the end of July, to be held on HWBOT.org. Seasoned overclockers can test their mettle to see who reigns supreme. With over 10,000 (USD) worth in prizes, the stakes are higher than ever before. The “Lucky Draw” is open to all participants whether or not they score top marks, the only requirement is that they participate for each stage in one of the competitions. Novices and beginners will all have a chance at taking home prizes to upgrade their machine for future competitions.
GIGABYTE will be awarding competition winners and participants with AORUS Z270X-Gaming 7 Motherboards, GIGABYTE Radeon RX480s, Intel Core i7-7700K processors, memory from G.SKILL and power supplies & liquid coolers from Enermax.
Each competition will have multiple stages comprised of different benchmarks. These benchmarks consists of 3DMark Fire Strike, XTU 5G, Catzilla and many more so participants have an even playing field. Points will be awarded to participants based on their rankings in benchmarks. The top three participants with the most points by the end of each competition wins—it’s as simple as that! It’s time to warm up your test benches and pull out the thermal paste as GIGABYTE’s overclocking competition season is about to start! The overclocking competitions and their corresponding start and end dates are the following:
March Madness: March 1st, 2017 – March 31st, 2017
April Extreme Clocking: April 1st, 2017 – April 30th, 2017
Summer Spectacular: May 1st, 2017 – May 31st, 2017
In Week 7 of 2017, we received 4632 benchmark results from 1157 registered overclockers around the world. The majority of the submissions is coming from Rookie overclockers representing 61% of the active community. They were responsible for 41% of the submissions. We had a peek at the most valuable submissions in a breakdown per league.
We continue the year with week 7. In the leaderboard we find a variety of golden cups. First up is Rauf from Sweden. He scored the Global First Place in 1xGPU Aquamark3 with a GeForce GTX 1080 clocked at 2000/2780 combined with a 7 GHz Core i7 7700K. Also in the Elite category we find OGS with a golden cup in the 3DMark06 Radeon HD 5870 category. The graphics card is clocked at 1450/1300 MHz alongside a 6.6 GHz Core i7 7700K. Moving down one category we find Hideo from Japan. Hideo scores the Global First Place in Wprime 32M with a 6851 MHz Core i7 7700K processor. Last but not least is the Rookie MrD3adGamer hitting the number one spot in the Core i7 5500U XTU category. Congrats to everyone making the table this week!
The overclocking results submitted during Week 7 generated in total 265 World Record Points, 8055 Global Points, and 10328 Hardware Points. The distribution per League is as follows: 20% for Elite, 38% for Extreme, 13% for Apprentice, 16% for Enthusiast, 4% for Novice, and 20% for Rookie. The representation of the active community is as follows: 2% Elite, 9% Extreme, 4% Apprentice, 15% Enthusiast, 9% Novice, and 61% Rookie.
The event was organized with support of premium partner Seasonic and event partners GIGABYTE Brazil and HyperX, who provided suitable hardware. Over 150 newcomers attended Overclocking Workshops and applied what they had learned in ambient competitions, while the best Overclockers from Latin America went head to head in the Extreme Overclocking contest.
“Building on the success of our previous visit to Latin America, we managed to reach more gamers and PC enthusiasts than ever before,” commented Pieter-Jan Plaisier, Director at HWBOT. “In terms of educating and informing Campus Party attendees about the world of Overclocking, the event truly excelled beyond our expectations.”
HWBOT World Tour – Sao Paulo 2017
The HWBOT World Tour 2017 is organized by HWBOT, the world’s leading platform for competitive overclocking whose mission includes evangelizing and promoting overclocking on a global level. Campus Party Sao Paulo has been a staple event for the HWBOT World Tour for years and in 2017 it is again a vital element in spreading the word of Overclocking in Latin America.