Submission Details
l0ud_sil3nc3`s PYPrime - 2b with BenchMate Ergebnis - Elite League
9sec 192ms mit DDR3 SDRAM at 1400.8MHz
Ranglisten Position
n.a.
Globale Rangliste
2nd
DDR3 SDRAM Rang:
2nd von 317
Points earned for overclocker league
-
Globale Punkte (UGP)
Not l0ud_sil3nc3's best submission
-
Hardware Punkte (UHP)
2nd mit DDR3 SDRAM
60.0 Punkte
Points earned for team league
-
Globale Team Power Punkte (GTPP) Not XtremeSystems's best submission
0.0 Punkte
-
Hardware Team Power Punkte (HTPP) 2nd Im Team verwendet DDR3 SDRAM
86.4 Punkte
Hardware Details
CPU Details
- Model: Intel Core i7 4770K 'Haswell-DT'
- Kühlung: Liquid Nitrogen
- Cores: 6.103,62Mhz(+74.39%)
-
Arbeitsspeicher Details
- Manufacturer: G.SKILL
- Produkt: Ripjaws Z
- Kühlung: Liquid Nitrogen
- Typ: 4096MB DDR3 SDRAM PC11000
- Geschwindigkeit: @ 1.401Mhz
- Timings: CL6.0 10-6-21 1T
-
VGA Details
- Geschwindigkeit: Mhz / Mhz (Bestand)
Mainboard Details
- Kühlung: Air (Stock)
- Chipsatz: Z97
Festplatten Details
- Kapazität: 2000GB (AHCI)
- Serie: P31 Gold NVMe (Cepheus controller)
Netzteil Details
- Serie: SuperNOVA T2
- Netzteil: 1.600 Watt
Neueste Kommentare
l0ud_sil3nc3 Kommentierte sein eigenes Ergebnis:
Asrock Z97 OCF + G.Skill 2400c8 RipZ
SparkysAdventure sagt:
ooooh, getting serious now
l0ud_sil3nc3 sagt:
These modules are the first 2/4 from the quad 2400c8 RipZ kit and only needed 2.15v for 2800c6, see how the others do next.
SparkysAdventure sagt:
Did those sticks ever do 2800c6 SP32M? That's impressively low volt, likely has scaling to 2933+
Emil.SU sagt:
Nice, it was getting boring on top. So what should be next 5775c with ln2 PSC or 7600k + whatever ram runs on shitty D3 mobo?
TaPaKaH sagt:
What year is it?
l0ud_sil3nc3 sagt:
These sticks never ran 2800 before but I remember they had a low boot voltage limit so even 2.20v failed to train. Setting 2.15v they trained super consistently at 2800 but failed to train 2933 and didn't spend much time trying higher after that.
How about 7600K + LN2 PSC + D3 mobo 😎
The best years™️
phobosq sagt:
Have you tried those sticks on air? What's the scaling when going from air to LN2 @2.1-ish volts? Curious to see what comes next, but 9 secs will fall sooner or later :D
Splave sagt:
slow clap :)
l0ud_sil3nc3 sagt:
Air these can run 2750c8 tuco tight at 1.92v > to 2800c6 tight on LN2 at 2.15v
The best PSC in my collection I believe is still the 2000c6 Pi but will find out soon
phobosq sagt:
Thanks, much appreciated. It seems that I'd have to go through whatever leftovers I can get online, I checked a few kits for volts and found two capable of 2760 8-13-8 but at around 2.05 air, funny thing is I always thought PSC hard walls at 1.96 on air. That's still far from 1.92
Bitte einloggen oder register to comment.